Shop by Brand: Audiopipe

FUSEHOLDER ANL AUDIOPIPE ACCEPTS 0-4GA.

• 24 KT. Gold Finish Screws
• Uses ANE (ANL) Fuse Up to 500 Amps
• Accepts 0 to 4 GA Cable Wire
• Clear Snap-on Dust Cover
• Base is Precision Machined

450 Watts Max
225 Watts (R.M.S)
Frequency Response: 50-4000Hz
Sensitivity: 97 dB
10"e; Black Paper Cone with Cloth Surround
2.0"e; High Temperature CCAR Voice Coil, TIL Bobbin
Rigid Steel Basket
Impedance: 4 Ohms
50 Oz Magnet
Includes Grill
Mounting Depth: 3 ¼"e;

Accepts 4 or 8 ga. wire
High temperature polycarbonate cover
Machined Solid Brass  with Satin Chrome Finish
Rectangular shape

Nippon Pipeman 16 pin Wiring Harness for 2000+ Kenwood

Audiopipe 4 Gauge Amplifier Kit

17ft, RCA Cable with Signal Wire
17ft, 4GA Red Power Cable
3ft, 4GA Black Power Cable
80AMP AFC Fuse
25ft, 16 AWG Speaker Wire
AFC Fuse Holder
Gold Ring Terminal Red Color
Gold Ring Terminal Black Color
Gold Plated Spade Terminal Red Color
Gold Plated Terminal Black Color
Butt Splices 2pcs
10 Assorted Cable Ties
3ft Split Loom Tubing

3.5mm RIGHT ANGLE PLUG ONE END + 2 RCA RIGHT ANGLE PLUGS OTHER END (MALE BOTH ENDS)
6' WHITE STEREO CABLE

AUDIOPIPE BIN MASTER SERIES (BULK) RCA "e;Y"e; ADAPTER
1 MALE TO 2 FEMALE

QUANTITY OF 1 IS A BAG OF 10 INDIVIDUALLY BAGGED STEREO RCA CABLES
SAME AS "e;AMP"e; SERIES CABLES EXCEPT FOR PACKAGING
CLEAR INSULATION OXYGEN FREE COPPER CONDUCTORS

Audiopipe Monoblock Amplifier, 1500 Watts

Full Bridge Amplifier - Class D
1 Ohm Stable
1 x 1810 Watts @ 1 Ohm
1 x 1160 Watts @ 2 Ohms
1 x 880 Watts @ 4 Ohms
(W x H x L): 8.75” x 3” x 7.25”
(W x H x L): 225 x 75 x 180 mm

Frequency Response: 15Hz - 20kHz
Signal to Noise Ratio: > 105dB
THD: < 1%
Input Sensitivity: 200mV
High Pass Filter: 15Hz - 80Hz @ 12dB / OCT
Low Pass Filter: 80Hz - 20kHz @ 12dB / OCT
Bass Boost: 12dB
RCA Inputs/RCA Outputs
Built-in Power, Clip & Protect LED Indicators

Includes: Remote Bass Knob
Fuse Block & 100Amp ANL Fuse

Audiopipe Class D Monoblock Amplifier, 3000 Watts

3000 x 1 @ 2-Ohms
DIM (WXHXL) 7"e; x 2.5"e; x 8.25"e;

150A ANL fuse and fuse Holder Included

Fan Cooled
2 Ohm Stable
Remote Visual Status Monitor
frequency Response: 10hz - 20 kHz
input Sensitivity: 0.2 Sv
Hi/Low Pass Crossover
subsonic Filter: 10hz - 80hz @ 12 Db
working Voltage: 9v - 16 V
bass Boost: 0- 10 Db
Low Level Input

Audiopipe Monoblock Amplifier, 5000 Watts

Full Bridge Amplifier - Class D
1 Ohm Stable
1 x 5035 Watts @ 1 Ohm
1 x 3280 Watts @ 2 Ohms
1 x 1850 Watts @ 4 Ohms
(W x H x L): 9” x 3” x 12”
(W x H x L): 229 x 75 x 305 mm

Frequency Response: 15Hz - 20kHz
Signal to Noise Ratio: > 105dB
THD: < 1%
Input Sensitivity: 200mV
High Pass Filter: 15Hz - 80Hz @ 12dB / OCT
Low Pass Filter: 80Hz - 20kHz @ 12dB / OCT
Bass Boost: 12dB
RCA Inputs/RCA Outputs
Built-in Power, Clip & Protect LED Indicators

Includes: Remote Bass Knob
Fuse Block & 400Amp ANL Fuse

100' ROLL
9 Wire (4 Pr. Speakers + Remote)
BLACK JACKET WITH METAL SHIELD
WHITE, GRAY, PURPLE, GREEN - 2 WIRES EACH - 1 W/BLACK STRIPE
1 BLUE WIRE
ALL WIRES ARE 18 GAUGE
CAN BE USED FOR CAR STEREO, ALARMS, HYDRAULICS, TRAILER LIGHTS, ETC.
HIGH TEMPERATURE + CHEMICAL RESISTANT

Audiopipe 12? Woofer, 900W RMS/1800W Max, Dual 2 Ohm Voice Coils

1800 Watts Max
900 Watts RMS
Frequency Response: 20-900Hz
Sensitivity: 93dB
3"e; 4-Layer Dual 2 Ohm Voice Coils
Woven Tinsel Leads
Foam Surround Stitched to Composite Cone
Patent Pipe Multi-Connect Terminal
High Power Strontium Magnets
Vented Motor Structure
Powder Black Cast Aluminum Basket
204 Oz. Magnet - Quad Stacked
Sold Individually
Mounting Depth: 7-5/8"e;

Super Bass Combo pack, Dual 12"e; Loaded Box w/ Amplifier and Amp Kit
600 Watts Max
Frequency Response: 25 - 1000Hz
Enclosure dimensions: 27.5"e;W x 15.5"e;D x 13"e;H

APSE120PC - Sealed Enclosure specifications:
Constructed of high grade MDF covered with automotive grade black carpet
Audiopipe logo embroidered in the top

APCL1002 amplifier:
50W x 2 @ 4 OHMS
100W x 2 @ 2 OHMS
200W x 1 @ 4 OHMS
500 Watts
2 Ohm Stable
Class A/B
High/Low Pass Crossover
Hi/Low Level Inputs
Remote Bass Control
3-Way Protection

Fuses: 1 x 25A

Dimensions; 7"e;W x 2-1/4"e;H x 8-3/4"e;L

BMS750 amp kit:
10 Ga. amp kit
Primary Wire I 17' 10 AWG Red
Primary Wire II 3' 10 AWG Silver
Speaker Wire 25' 16 AWG
Fuse 40 AMP AGU
Fuse Holder N5-C
Loom Tubing 3' Split Loom Tubing
Cable Ties 10 Assorted

3.5mm RIGHT ANGLED STEREO MALE PLUGS BOTH ENDS
6 FOOT WHITE CABLE - STEREO AUDIO

CLAMSHELL PEGBOARD PACK
4 GA. POWER WIRE - 17' BLUE + 3' SILVER
17' 18 GA. BLUE RCA WITH REMOTE TURN ON
25' BLUE 16 GA. SPEAKER WIRE
3' SPLIT LOOM
80 AMP AFC FUSE + FUSE HOLDER
Includes: Fuse Holder, Wire Ties, Power Rings & Spade Terminals

5-Band Graphic EQ with 7V Line Driver
S/N Ratio: 100dB
Nickel Plated locking adjustable knobs
Universal half-din chassis
Adjustable gain with up to 7V output
20dB headroom output & Level controls
Nickel plated RCA input connectors
Freq. Response: 10Hz-50kHz +/-1dB
Volume & Fader Controls
Preamp Outputs: Front/Rear
Graphic center frequencies: 60Hz, 250Hz, 1kHz, 4kHz, 16kHz
Boost cut: 18dB
THD: 0.005%
Includes flush mount bezel

12Ft 2 RCA Plugs to 2 RCA Plugs with signal wire
10Ft 4 AWG white primary wire
10Ft 4 AWG black primary wire
100 AMP Breaker
25Ft 16 AWG white speaker wire
Marine Grade Ring Terminal white Color
Black Spade Terminal Black Color
Black Spade Terminal White Color
Butt Splices 2 Pcs
10 Assorted Cable Ties
3Ft Split Loom Tubing

9 Band Parametric: 50Hz, 125Hz, 250Hz 500Hz, 1KHz, 2KHz 4KHz, 8 KHz, 16 KHz
9V Line Driver
Boost/Cut: 12 dB
Nickel plated knobs
Selectable Subwoofer Frequency: 60Hz/90Hz
Universal half-din chassis
Active pre-amplifiers with adjustable input sensitivity
Individual left and right sensitivity controls for auxiliary input
20dB headroom output and level controls
Subwoofer output and level controls
Gold-plated RCA input connectors
Three stereo RCA outputs
Fader, Volume & Sub Controls
Auxiliary RCA inputs
Main/auxiliary input selector

Audiopipe Mono Block Amplifier, 1800 Watts
1 x 1722 Watts RMS @ 1 Ohm
1 x 1104 Watts RMS @ 2 Ohms
1 x 650 Watts RMS @ 4 Ohms
Dim (W x H x L) 9.2"e; x 2.2"e; x 11.8"e;

Current Draw: 168A (Fuse & Holder NOT Included)

Class D
1 Ohm Stable
Frequency Response: 18 - 180 Hz
Distortion: <0.5%
Low Pass Filter: 40 - 180 Hz
Subsonic Filter: 0 - 50 Hz
Bass Boost: 0 - 12dB
Phase Control
RCA In/Outputs
Temperature Protection
Remote Bass Control

Audiopipe APCLE Series Class D Monoblock Amplifier, 1000 Watts

1000 X 1 @ 1 OHM
600 X 1 @ 2 OHMS
400 X 1 @ 4 OHMS
Dim (WxHxL) 7"e; x 2.25"e; x 11.375"e;

REQUIRES AN 80 AMP EXTERNAL FUSE
(ANL FUSE AND FUSE HOLDER INCLUDED)

1 Ohm Stable
MOSFET Power Supply
Variable Subsonic Filter
Low Pass Crossover
Bass Boost
Phase Shift
2-Way Protection
Heavy Duty Aluminum Alloy
REMOTE BASS KNOB INCLUDED

Audiopipe APCLE Series Class D Monoblock Amplifier, 1500 Watts

1500 X 1 @ 1 OHM
950 X 1 @ 2 OHMS
600 X 1 @ 4 OHMS
Dim (WxHxL) 7"e; x 2.25"e; x 16"e;

REQUIRES A 100 AMP EXTERNAL FUSE
(FUSE AND FUSE HOLDER INCLUDED)

1 Ohm Stable
MOSFET Power Supply
Variable Subsonic Filter
Low Pass Crossover
Bass Boost
Phase Shift
2-Way Protection
Heavy Duty Aluminum Alloy
REMOTE BASS KNOB INCLUDED

Audiopipe APCLE Series Class D Monoblock Amplifier, 1800 Watts

1800 x 1 @ 1 Ohm
1150 x 1 @ 2 Ohms
750 x 1 @ 4 Ohms
Dim (WxHxL) 7"e; x 2.25"e; x 18.25"e;

REQUIRES A 120 AMP EXTERNAL FUSE
(FUSE AND FUSE HOLDER INCLUDED)

1 Ohm Stable
MOSFET Power Supply
Variable Subsonic Filter
Low Pass Crossover
Bass Boost
Phase Shift
2-Way Protection
Heavy Duty Aluminum Alloy
REMOTE BASS KNOB INCLUDED

Audiopipe 2 Channel Amplifier, 2100 Watts
2 x 230 Watts RMS @ 2 Ohms
2 x 150 Watts RMS @ 4 Ohms
Dim (W x H x L) 9.2"e; x 2.2? x 10.7"e;

2 x 30 A Fuses

Class A/B
2 Ohm Stable
Frequency Response: 20 Hz - 20000 Hz
Distortion: <0.5%
Low Pass Filter: 40 - 250 Hz
High Pass Filter: 50 - 5000 Hz
Bass Boost: 0 / 6 / 12 Hz
Remote Bass Control
RCA In/Outputs