Brush Attachment - Medium - Yellow Designed for use with Camco's fixed-length or adjustable-length multi-purpose handles. The brush head is 7'' wide with a non-marking perimeter bumper. The medium-soft or stiff bristles are perfect for textured surfaces, non-skid areas, vinyl, teak, and canvas materials. Features:
Cleaning Applications:
|
Brush Attachment - Soft - Blue Designed for use with Camco's fixed-length or adjustable-length multi-purpose handles. The brush head is 7 in. wide with a non-marking perimeter bumper. The soft bristles are perfect for general-purpose cleaning of vinyl, teak, canvas, fiberglass, and painted surfaces. Features:
Cleaning Applications:
|
Bumper Cap with Insect Screen - 2-Pack Replace lost or damaged RV bumper caps with Camco’s RV bumper caps, featuring vent holes and a squeeze grip for easy installation and removal. Holes allow ventilation while keeping flying insects out. It fits standard OEM 4-inch square bumpers and is constructed of durable polyethylene. Patented. Features:
*Sold as a pack (2) |
Clamp-On Rail Mounted Cup Holder - Large for Up to 2" Rail - White Camco's Clamp-On Rail Mounted Cup Holder provides a secure location to keep your beverage. It is a great addition to any boat with 1-1/2-inch to 2-inch rails. The secure clamp assembly keeps the cup holder in place with the help of tension adjustment screws. Swivel mount allows you to install on any angle rail keeping your cup holder level and in place. The cup holder is constructed of a durable, UV-resistant polymer and fits most standard sized drinks, cups, cans, bottles and tumblers. Features:
|
Clamp-On Rail Mounted Cup Holder - Small for Up to 1-1/4" Rail - White Camco's Clamp-On Rail Mounted Cup Holder provides a secure location to keep your beverage. It is a great addition to any boat with 3/4-inch to 1-1/4-inch rails. The secure clamp assembly keeps the cup holder in place with the help of tension adjustment screws. Swivel mount allows you to install on any angle rail keeping your cup holder level and in place. The cup holder is constructed of a durable, UV-resistant polymer and fits most standard sized drinks, cups, cans, bottles and tumblers. Features:
|
Curved Leveler & Wheel Chock The Camco Curved Leveler is a simple way to level your vehicle by giving a tire up to 4-inches of extra lift. The honeycomb design makes the leveler lightweight but durable. The drive-on curved design allows you to only drive on to as much height as needed, then chock the leveler at the exact right height. The included chock has non-slip rubber grippers on the bottom. Patented. Features:
|
Curved Leveler & Wheel Chock *2-Pack The Camco Curved Leveler is a simple way to level your vehicle by giving a tire up to 4-inches of extra lift. The honeycomb design makes the leveler lightweight but durable. The drive-on curved design allows you to only drive on to as much height as needed, then chock the leveler at the exact right height. The included chock has non-slip rubber grippers on the bottom. Patented. Features:
|
Eaz-Lift 10" Wheel Stop with Wrench & Lock - Metal Prevent tandem-tire shift using just one piece of equipment-Eaz-Lift's Premium Metal Wheel Stop. Zinc-plated for corrosion resistance has raised ribs on the contact surface for increased traction which helps prevent tire shift/slippage between tandem tires spaced from 3-10 inches apart. It also includes a comfort-grip ratchet wrench for easy installation and a lock to keep it secure. Features:
|
Eaz-Lift Square Bumper Hitch & Bumper Mount The RV Bumper Hitch clamps onto a 4-inch square RV bumper, creating a hitch receiver without drilling or permanent installation. The 2-inch hitch receiver is ideal for lightweight applications, such as bike and cargo racks. The heavy-duty, durable powder-coated steel is corrosion-resistant and built to last. *Please note that the RV BUMPER HITCH IS NOT DESIGNED FOR TOWING. Features:
|
FasTen Leveling Blocks with T-Handle - 2x2 - Brown *10-Pack The Camco FasTen Leveling Blocks allow you to stack the interlocking blocks to the desired height for safe and easy leveling. Each block adds a full inch to stack height. Camco’s FasTen Leveling Blocks can be used with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks, and tandem axles. The convenient carrying handles easily pull up for carrying or twist down to secure blocks together for storage. Product dimensions: 8.5” x 8.5” x 1”. Stack height should not exceed 4-1/2 inches. Features:
|
FasTen Leveling Blocks with T-Handle - 2x2 - Yellow *10-Pack The Camco FasTen Leveling Blocks allow you to stack the interlocking blocks to the desired height for safe and easy leveling. Each block adds a full inch to stack height. Camco’s FasTen Leveling Blocks can be used with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks, and tandem axles. The convenient carrying handles easily pull up for carrying or twist down to secure blocks together for storage. Product dimensions: 8.5” x 8.5” x 1”. Stack height should not exceed 4-1/2 inches. Features:
|
Fluid Extractor - 3 Liter Change your oil through the dipstick tube and pump most any other fluid! For all types of motors, watercraft and vehicles. Use a TRAC fluid extractor for oil changes and the removal of fuel, coolant and transmission fluid. Use it to pump out bilge water and trapped fluids. Perfect for any situation where draining is difficult. Self-priming pumps create a powerful vacuum to remove almost any non-corrosive liquid. It’s an easier, cleaner way to drain engines with hard-to-reach drain plugs. Features:
|
LED Double Dome Light - 12VDC - 320 Lumens
The LED Double Dome Light Replacement Kit is 320 lumens total, or 160 lumens per bulb. The 12-Volt Light Kit comes with:
Great for replacing the dome light in your marine or recreational vehicle. Light is warm white. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Leveling Block Jack Stand The Camco Tongue Jack Stand evenly distributes the weight of the trailer tongue while providing stability and support. It can fit between a 2-inch and 6-inch-diameter tongue jack and also adds additional support for slide-out supports. The Tongue Jack Stand interlocks with Camco leveling blocks and can also be used with most brands of leveling blocks. Small and easy to store, the tongue jack stand measures 8.43 inches x 8.43 inches x 1.48 inches. It has a weight rating of 3,500 lb. and is constructed of UV-stabilized polypropylene. Made in the USA. Patented. Features:
|
RV Wash Brush with Adjustable Handle Camco’s RV Flow-Through Wash Brush with Adjustable Handle is the perfect tool for washing an RV, house, and more. The handle adjusts from 43 inches to 71 inches long and includes a standard garden hose connection and an on/off button to control water flow through the brush head. A 10-inch-wide soft bristle brush head that locks ensures that the wash head won’t spin while delivering maximum cleaning power. The brush’s rubber corners protect what you are washing. Features:
|
Sidewinder Plastic Sewer Hose Support - 10' Camco's Sidewinder RV Sewer Hose Support helps keep your sewer hose secure over uneven terrain and provides stability for trouble-free drainage. The support fits up to a 10-foot RV sewer hose with a 3-inch diameter. A flexible design allows this support to curve around obstacles. It is angled to create a downward slope for better drainage. Deep cradles securely hold your RV sewer hose in place without straps; the product will not creep closed. This item telescopes when in use and folds for compact storage. The support is made of sturdy, lightweight plastic with rust-free parts. It is ready right out of the box—no assembly required. Includes a convenient handle for easy carrying. Features:
|
Towing Mirror Clamp-On - Double Mirror The Camco Clip-On Dual-View Tow Mirror gives you more visibility when towing, making driving while towing safer and giving you peace of mind. The Dual-View Mirror has two independently adjusting mirrors and an aerodynamic design that reduces vibrations. Installation is easy- there are no tools required. The adjustable rubber straps fit around any mirror between 7 and 10 inches tall. Clip-On Mirror fits driver or passenger side mirror. Features:
|
Towing Mirror Clamp-On - Single Mirror The Camco Clip-On Tow Mirror gives you more visibility when towing, making driving while towing safer and giving you peace of mind. The Clip-On Mirror features a 360-degree ball and socket adjustment and an aerodynamic design that reduces vibrations. Installation is easy- there are no tools required. The adjustable rubber straps provide a universal fit. Clip-On Mirror measures 5” x 7-1/2” and fits driver or passenger side mirror. Features:
|
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |