Shop by Brand: PAC

4 OHM 0-800
8 OHM 0-400
WORKS WELL W/ 5.25 SIZE SPEAKERS

4 OHM 0-600
8 OHM 0-300
WORKS WELL W/ 6"e; SIZE SPEAKERS

4 OHM 0-300 HZ
8 OHM 0-150
WORKS WELL W/6X9 SPEAKERS

This only extends range of a remote eye, It does not extend the range
of IR wireless headphones.
17' EXTENDER - CARRIES THE SIGNAL FROM IR REMOTE CONTROLS TO DEVICES
THAT ARE HIDDEN OR OUT OF RANGE OF THE REMOTE CONTROL.
40-56 KHz CARRIER FREQUENCY RANGE.
IR RECEIVER, 17' CABLE, + IR REPEATER - CONTROLS MORE THAN 1 DEVICE IF
THEY ARE LOCATED WITHIN LINE-OF-SIGHT RANGE OF THE IR REPEATER.

Provides an audio/video signal output from the factory radio in select 2012-Up GM Vehicles to an aftermarket monitor.
Also for use with a radio replacement interface (i.e. RP5-GM32) to replace a factory radio and retain the overhead LCD monitor and IR system.

GMRVD2 APPLICATIONS:
Option A) Can be used with RP5-GM32 radio replacement interface to install an aftermarket radio and route the A/V signal to the OEM rear monitor.
The GMRVD2 can also pass A/V from the vehicle's rear A/V input, into the new aftermarket radio. From there, the cable routes the signal to the OEM rear monitor, and IR transmitter in the OEM RSE.
Option B) Can be used to add aftermarket video screen(s) to the vehicle and route video from the OEM radio, or DVD player in center console to the new monitor(s).
Compatibility and Notes: (Please read before purchasing this part)
1. When replacing factory radio the GMRVD2 must be used in conjunction with the OS-4 or RP5-GM33 to retain all safety and convenience systems.
2. PAC 0S-4/RP5-GM32 is needed to power the IR headphone system.
3. Click for INSTALLATION INSTRUCTIONS

The GMRVD2 must be used in conjunction with PAC OS-4 or RP5-GM32 to retain all safety and convenience systems.

Adjustable High Power 2 channel Line Out Converter
Handles input signals up to 50 Watts per channel
50 watts max power handling
Linear 20 to 20,000Hz output based on input signal
Transformer isolated for optimal sound and performance
Maintains correct phasing
Works with most factory installed radios
Detachable wiring harness
Integrated wire tie mounts

LINEAR FROM 20-20,000 Hz @ +/-0.5dB (SIGNALS BELOW 20 Hz ARE CUT OFF).
MAINTAINS SIGNAL PHASE
ISOLATED INPUT + OUTPUT CIRCUITS TO PREVENT GROUND LOOP NOISE.

OEM-1 with a vehicle specific harness plugs into the vehicle's wiring and provides a stereo RCA audio output for adding aftermarket amplification.
Provides full range audio output 20-20,000Hz. Audio output level is controlled by the volume of the factory radio.

Compatibility Notes
Warning chimes will sound through the front left RCA output
Not compatible with factory amplified audio systems
Turning on the rear seat entertainment controls will make the rear outputs of the interface play the second audio source

Plug in installation retains factory wiring integrity
Linear 20-20,000Hz sound reproduction based on input signal
4 channel RCA output
Output level controlled by factory radio

Intelligent Signal Sensing Turn-on Circuit
High Output 10volt RCA Output
Ultra Low 50M Ohm outoput/20 Ohm Input Impedance
SMT (Surface Mount Technology)
Output Clipping LED
Plastic Housing

Connects virtually any audio source.
» Dash mountable aux input adapter provides factory look and finish.
» 3.5mm to RCA adapter included.
» Extends aux input
» "e;AUDIO INPUT"e; label on dash mounted connector.

Package Contents :
» 3.5mm (male) to 3.5mm (female) dash panel mount audio input (6ft) x1
» 3.5mm (male) to 3.5mm (male) Audio cable (4ft) x1
» 3.5mm (female) to RCA Adapter Cable (6 inches) x1

DESIGNED TO RETAIN THE USE OF THE FACTORY JBL AMPLIFIED AUDIO SYSTEM
WHEN THE FACTORY RADIO IS REPLACED WITH AN AFTERMARKET RADIO. IF THE
AFTERMARKET RADIO HAS 4 CHANNEL RCA OUTPUTS, THE TATO WILL RETAIN THE
FACTORY FUNCTIONS OF BALANCING AND FADING THRU THE FACTORY JBL AMP.
ALSO COMPATIBLE WITH THE SYNTHESIS 5.1 AND 7.1 SURROUND SYSTEMS.

APPLICATIONS: TOYOTA
2003-07 4RUNNER 2007 AVALON
2007 CAMRY 2008 HIGHLANDER
2004-05 PRIUS 2004-07 RAV-4
2005-07 SEQUOIA 2007-07 SIENNA
2006-07 SOLARA 2005-06 TACOMA
2004-07 TUNDRA

USE- TO ADD AN AMPLIFIER TO A FACTORY RADIO W/O RCA OUTPUT.
SNI8, 15 + 35 ALL:
-ARE LINIAR FOR 20 - 20,000HZ
-FEATURE TRANSFORMER ISOLATION BETWEEN INPUTS AND OUTPUTS
-KEEP THE SIGNAL PHASE
SNI-35 CONVERTS FROM 2-40 WATTS/CHANNEL - ADJUSTABLE CONVERSION
SNI-15 "e; "e; 2-30 "e; "e; - FIXED 10:1 CONVERSION
SNI-8 "e; "e; 2-10 "e; "e; "e; 5:1 "e;

PRO Series 2-Channel High Power Line Output Converter
Designed to optimize audio levels between radio and amplifier to achieve the best audio quality
Ideal for use when adding an amplifier to an OEM system
Speaker level input to RCA level output
Single dial, precision matched stereo, level gain adjustment
Ultra-compact size for greater installation flexibility

*Replaces SOEMT*
Level 7 adds Remote turn on and precision SMT contruction over levels 3 and 5.

PRO Series 2-Channel High Power Line Output Converter
Designed to optimize audio levels between radio and amplifier to achieve the best audio quality
Ideal use when replacing factory (OEM) radio or amplifier
Configurable for speaker level or RCA level input/output
Single dial, precision matched stereo, level gain adjustment
Signal-sensing circuit for amplifier remote turn-on
Surface Mount Construction (SMT) for reliable and noise-free operation
Ultra-compact size for greater installation flexibility

Level 7 adds Remote turn on and precision SMT contruction over levels 3 and 5.

PRO Series 4-Channel High Power Line Output Converter
Designed to optimize audio levels between radio and amplifier to achieve the best audio quality
Ideal use when replacing factory (OEM) radio or amplifier
Configurable for speaker level or RCA level input/output
Single dial, precision matched stereo, level gain adjustment
Signal-sensing circuit for amplifier remote turn-on
Surface Mount Construction (SMT) for reliable and noise-free operation
Ultra-compact size for greater installation flexibility

WORKS ON MOST 2002 + EARLIER GM VEHICLES WITH BOSE SYSTEM. USE OS1BOSE
WHEN REPLACING FACTORY RADIO WITH AFTERMARKET RADIO TO RETAIN ONSTAR
FUNCTIONALITY. COMES W/OEM-1 PREMIUM SOUND SYSTEM INTERFACE + AN OS1.
NOTE: WILL NOT WORK WITH ONSTAR EQUIPED VEHICLES THAT HAVE FACTORY
RADIO WITH RDS (THOSE RADIOS WILL HAVE AN "e;RDS"e; LOGO ON THE FRONT FACE
OF THE FACTORY RADIO).


*** GO TO www.pac-audio.com FOR MORE INFORMATION. ***

Retains OnStar® when the factory radio is replaced
Retains Factory Bluetooth (2009+ model vehicles)
Retains rear seat audio controls
Retains all warning chimes (chime module included)
Retains back-up sensors/park assist
Retains factory BOSE audio systems
Retains factory premium BOSE audio (does not support fading)
Supports non-amplified audio systems
Built in pre-programmed SWC retention
Dual zone function
Chime volume adjustment (factory buttons)
Rear Seat Entertainment Retention
OnStar volume adjustment
Retained accessory power output (R.A.P.)
Reverse Wire output
VSS (Vehicle Speed Sense) output
Illumination output
Parking brake output
Includes antenna adaptor
Retains OnStar Turn-By-Turn voice prompts