12\" MALE PL259 CONNECTOR TO DUAL MALE MOTOROLA CON
|
12\' RG58AU COAX W/ MOLDED PL259S
|
13IN FLOOR JACK EXTENSION
|
2 TON ALUMINUM FLOOR JACK
|
2 TON ALUMINUM FLOOR JACK
|
48in HI-LIFT JACK BOXED
|
The mission of Hope for the Warriors is to enhance the quality of life for post-9/11 service members, their families, and families of the fallen who have sustained physical and psychological wounds in the line of duty. Hope for the Warriors is dedicated to restoring a sense of self, restoring the family unit and restoring hope for our service members and our military families. As an American company, Hi-Lift Jack Company wants to provide support for those service members that have served and made tremendous sacrifices for the freedoms we enjoy on a daily basis. Hi-Lift Jack Company will donate a portion of its proceeds for every Hi-Lift Patriot Jack sold to Hope for the Warriors.
|
5700060 RB JACK MT BRKT
|
Secure your Hi-Lift Jack with your Jeep key.Easy to install. Available for driver or passenger side, Red or Black.
|
Secure your Hi-Lift Jack with your Jeep key.Easy to install. Available for driver or passenger side, Red or Black.
|
BOLT ON JACK TOPWIND
|
3,000 lb capacity. Used with Hi-Lift Jack for bumpers that are slotted or have a curved surface. Manufactured of high-quality steel. Makes raising one wheel of average vehicle easy. Designed to be used with Hi-Lift Jacks only.
When used with the Hi-Lift Jack, which is not itself designed to be used on curved bumpers, the Bumper Lift makes raising one wheel of most average sized vehicles up to 2 (5 cm) above the ground an easy task.
Never attempt to lift more than one wheel at a time.
|
DC POWER JACK FOR BC235XLT/BC60XLT-1/BC245
|
DC POWER JACK FOR BC250D
|
DC POWER JACK FOR BC72XLT
|
Hi-Lift brackets will work with part number 5127 Jerry can holders.
Fits 1997 to 2012 Wrangler, Rubicon and Unlimited
2 and 4-door models
For swing arm part number 5293
Includes 3-pieces
|
The locking knob is a “must have” for any hood mount. Adjustable tube mount, 4XRAC, or LOC-RAC owner. The locking knob replaces an existing knob or wing nut provided on Hi-Lift® Jack mounting accessories. Once tightened, the locking knob can be locked with the provided key. Once locked, the locking knob spins freely and cannot be removed, securing the Hi-Lift® Jack in the mount. There are two size locking knobs available… one model (HM-LK) fits Hood Mounts only. The other model (VERS-LK) fits Adjustable Tube Mounts, 4XRAC’s, and Loc-Rac’s. The VERS-LK can also be used to secure and lock the Unique Winch-Clamp-Spreader Attachment that comes only with the Hi-Lift® X-TREME Jacks.
|
Jack handle strap holds your Hi-Lift Jack handle in place and secure so you get no rattling or vibrations.
|
The Hi-Lift Jack Hood Hinge Bracket mounts to existing hood hinge holes, eliminating the need for drilling, and making installation a snap. Contructed from steel plate, the bracket includes two threaded knobs to tighten, and a strap that ties to the Jack's handle to eliminate movement. All mounting hardware is included. A matching Lightbar affixes to the Hood Hinge Bracket and allows up to three lights to be positioned in front of the Hi-Lift Jack.
|
These brackets mount to existing mount points on the hood’s hinges which means no drilling of any kind is required. These kits are easily installed in minutes and are the most complete of their kind. On top of the actual bracketry, these kits also include replacement mounting hardware in stainless steel, and a strong Velcro strap for securing your jacks handle to the body of the jack itself. Testing with our bracket kit with this strap proved to provide absolutely no rattling at all!
As an additional accessory, we’ve created a matching light bar. This light bar installs to the Hi-Lift bracket and allows you to mount 3 lights to the bar positioned in front of the Jack.
|
Secure your Hi-Lift Jack to the side or rear of your Garvin Wilderness Rack. This Hi-Lift mount will work on all 4"H Garvin Wilderness Racks.
|
The locking knob is a “must have” for any hood mount. Adjustable tube mount, 4XRAC, or LOC-RAC owner. The locking knob replaces an existing knob or wing nut provided on Hi-Lift® Jack mounting accessories. Once tightened, the locking knob can be locked with the provided key. Once locked, the locking knob spins freely and cannot be removed, securing the Hi-Lift® Jack in the mount. There are two size locking knobs available… one model (HM-LK) fits Hood Mounts only. The other model (VERS-LK) fits Adjustable Tube Mounts, 4XRAC’s, and Loc-Rac’s. The VERS-LK can also be used to secure and lock the Unique Winch-Clamp-Spreader Attachment that comes only with the Hi-Lift® X-TREME Jacks.
|
HYDRAULIC RECOVERY JACK
|
Includes 8' strap, winch tensioner, custom nose attachment, gloves, hardware and carrying case.
|
Support your sagging jack handle and get it back up where it belongs. Designed specifically to fithigh-liftstyle off-road type jacks, the Jack Strap secures the loose and noisy jack handle with indestructible HYPER-FLEX polyurethane. Unique "thru-hole" design allows a secure and flush fit mounting on most vehicle bumpers, beds and rails. It stays on the jack all the time because the design allows the handle to complete its ratcheting cycle. Other designs do not- and have to be taken off to allows the jack to move upward. No more embarrassing rattling parts on your ultimate off-road ride. The perfect solution to a persistent problem!
|
The JackMate® - Lift Jack Accessory is designed as a manual extrication & rescue tool. The JackMate® replaces a standard lift jack's limited capacity top clamp with a multipurpose attachment and is rated to the full capacity of the jack as a clamp, winch, spreader or a base. The JackMate® slides over either end of the jack bar and is attached with a quick-release pin. As a top clamp, the JackMate® dramatically increases the jack's winching, clamping and crushing capabilities. As a replacement for the jack base, the JackMate® ClawFoot™ is engineered to "bite" into boards or logs to help prevent the jack from sinking in mud, sand, ice and snow. Updated features for 2009 include a super-grip, diamond plate top, wire fence pulling slots (and bottle opener), an easier pin for attaching the JackMate® to the jack, and quick release replacement pin for the jack's base.
|
In recent years, many vehicle changes have been made in body styles, bumper styles, larger tires and/or lift kits added, making it harder to find a place to jack up your vehicle. The Lift-Mate is designed to provide a lifting point from most wheels (instead of the bumper) when used with a Hi-Lift®, the Lift-Mate makes raising one wheel of most average-sized vehicles a quick an easy lifting task.
|
LOCK PIN EXTREME JACK
|
|
|
|
|
Copyright © 2009-2019 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |