Shop by Brand: Axxess

This Harness for 2015 and Up Subarus with 6.2in screen and without NAV retains the factory backup camera and the factory aux input It also comes with a 12 volt to 6 volt converter.

Feature:

• Includes the AXCAM6V 12 Volt to 6 Volt converter
• Retains the factory backup camera
• Retains factory AUX In jack
• Provides NAV outputs parking brake reverse speed sense

This USB Port Retention Interface Harness for select 2012 to 2013 Toyota and Lexus vehicles allows you to install an aftermarket stereo and retain the rear USB input port.

Feature:

• Retains the OE USB Port on Select Toyota Vehicles
• Retains the OE USB Port on Select Toyota Vehicles
• Retains the OE USB Port on Select Toyota Vehicles
• Retains the OE USB Port on Select Toyota Vehicles

This Backup Camera Retention|Add On Wiring Harness for select 2011 to 2013 Toyota vehicles allows you to easily remove the factory stereo and replace it with an aftermarket stereo and retain the factory backup camera or allows an aftermarket camera to be added to the factory screen. Harness is compatible with display and navigation model radios only.

Feature:

• Retains Factory Back-Up Camera to an Aftermarket Radio
• Allows an Aftermarket Camera to be Added to the OEM Screen
• For Display and Navigation Model Radios Only
• Retains Factory Back-Up Camera to an Aftermarket Radio

This Optional 28 Pin Harness with Steering Wheel Control for select 2012 and up Toyota Lexus Scion and Subaru vehicles allows you to easily remove the factory stereo and replace it with an aftermarket stereo that will allow the user to retain their factory installed steering wheel controls without having to splice into factory wiring |ASWC required and sold separately|. The included RCAs allow the user to retain their factory installed 3.5mm jack.

Feature:

• Retain factory steering wheel controls
• Included RCAs allow the user to retain their factory installed 3.5mm jack
• Aftermarket radio must have AUX in
• This is an Optional Harness main power harness still required

AXBUCHT26V
AX-TOYCAM2 W 6VOLT CONVERT

Feature:

• AXBUCHT26V AX-TOYCAM2 W 6VOLT CONVERT
• AXBUCHT26V AX-TOYCAM2 W 6VOLT CONVERT
• AXBUCHT26V AX-TOYCAM2 W 6VOLT CONVERT
• AXBUCHT26V AX-TOYCAM2 W 6VOLT CONVERT

This Backup Camera Retention Add On Wiring Harness for select 2013 to 2016 Toyota and Scion vehicles allows you to easily remove the factory stereo and replace it with an aftermarket stereo and retain the factory backup camera or allows an aftermarket camera to be added to the factory screen with display and navigation model radios. Includes AX CAM6V 12 volt to 6 volt converter.

Feature:

• Retains the Factory Back Up Camera to an Aftermarket Radio
• Allows an Aftermarket Camera to be Added to the OEM Screen
• 6 Volt Turn On Included
• 2013 to 2016

This Amplifier Turn On Interface for select 2004 to 2010 Chrysler Dodge and Jeep vehicles allows you to install a high powered aftermarket receiver without bypassing the premium factory system. Used in amplified or nonamplified systems Interface provides accessory power and NAV outputs. Retains blind spot detection system R.A.P. and balance and fade. Features adjustable gain control for overall volume on amplified systems high level speaker input and is Micro B USB updatable.

Feature:

• For Select 2005-07 Chrysler OEM amplified systems
• 12-volt accessory output
• Retains RAP if equipped
• USB update interface compatible

This Data Interface Harness is designed to allow the user to replace the OEM radio in select factory amplified and non amplified 2004 to 2012 Chrysler Dodge and Jeep vehicles and retain the use of the OEM amplified audio system. Interface provides accessory power and NAV outputs Retains blind spot detection system if equipped R.A.P. and balance and fade. Features adjustable gain control for overall volume on amplified systems high level speaker input and is Micro B USB updatable.

Feature:

• Provides accessory power (12-Volt 10-Amp)
• Retains R.A.P. (Retained Accessory Power)
• Used in non-amplified and amplified systems
• Provides NAV outputs parking brake reverse mute speed sense

The CHTO-02 interface is designed to allow the user to replace the OEM radio with an aftermarket unit in amplified 2002-2004 Dodge Ram/2004-2008 Chrysler Pacifica and retain the use of the OEM amplified audio system. Includes prewired ASWC-1 harness (ASWC-1 not included).

Feature:

• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (Retained Accessory Power)
• Includes Navigation outputs
• USB update interface compatible

The CHTO-03 interface is designed to allow the user to replace the OEM radio with an aftermarket unit in select amplified 2007 Chrysler and Jeep vehicles and retain the use of the OEM amplified audio system. The CHTO-03 will also retain the retained accessory power convenience features if the vehicle is so equipped. In addition to these features the CHTO-03 now has the required outputs for the installation of a navigation radio.

Feature:

• For 2007 Dodge Nitro & Jeep Wrangler Amplified Systems
• 12-volt accessory output
• Retains RAP if equipped
• USB update interface compatible

This interface harness allows the user to install an aftermarket car stereo in select 2012 and up Toyota models and retain the factory amplified audio system. The interface retains your balance and fade controls provides accessory power and is micro-USB updateable. The interface also includes a plug in connector for the ASWC 1 steering wheel control harness |sold separately| which makes it much easier for you to keep your steering wheel audio controls.

Feature:

• Provides accessory power (12-Volt 10-Amp)
• For use in amplified systems
• High level speaker input
• Micro B USB updatable

The interface harness lets you install an aftermarket receiver into select 2005-2007 Toyota and Lexus vehicles without bypassing the premium factory system. The interface provides an amplifier turn-on signal speaker-level connections and a 12-volt accessory power lead for your new stereo.

Feature:

• For Select 2005-2007 Toyota Vehicles
• Adjustable input gain
• USB update interface compatible
• Retain the use of the JBL and JBL synthesis amplified audio systems

Allows easy conversion to aftermarket head units while retaining accessory outputs for navigation reverse parking brake VSS etc. and high-level speaker input. Perfect for use with car stereos featuring non amplified systems or while replacing amplified systems. 12 volt 10 amp car accessory facilitates easy installation and allows the user to connect a USB device.

Feature:

• Maintains the retained accessory power (R.A.P.) feature
• Provides NAV outputs(parking brake reverse and speed sense)
• Used In amplified or non-amplified systems
• Retains balance and fade

This Rear Seat Entertainment Retention Wiring Harness for select 2007 to 2010 Toyota vehicles allows you to easily remove the factory stereo replace it with an aftermarket stereo and retain the rear seat entertainment audio and video. Aftermarket radio must have A|V output to use this product.

Feature:

• Rear Seat Entertainment Retention Harness
• Select 2007 to 2010 Toyota Vehicles
• Retains Rear Seat Entertainment Audio and Video
• Aftermarket Radio must have Audio In | Video In

This Accessory and NAV output CAN interface wiring harness for select 2012 to 2015 Fiat 500 vehicles can be used in non amplified and standard amplified systems and designed to provide a 12 volt 10 amp switched accessory output along with the rest of the wires needed to install an aftermarket radio and retain the Retained Accessory Power function and the use of your OE USB and 3.5mm if equipped. Includes ASWC 1 harness |ASWC 1 not included| and also provides VSS |Vehicle Speed Sense| parking brake and reverse signals to an aftermarket navigation receiver making the installation easier.

Feature:

• Provides Accessory Power (12-Volt 10-Amp)
• Retains R.A.P. (Retained Accessory Power)
• Used In Both Amplified and Non-Amplified Systems
• Provides NAV Outputs (Parking Brake Reverse and Speed Sense)
• Pre-Wired ASWC-1 Harness (ASWC-1 Sold Separately)
• High Level Speaker Input
• Retains OE BT/USB and 3.5mm Audio
• Micro-B USB Updatable

This 8 pin USB Port Retention Harness for select 2011 and up Nissan vehicles allows you to install an aftermarket stereo and retain the rear USB input port on your aftermarket radio by plugging directly into the factory USB and then to the aftermarket stereo. 6 ft. Long. Includes under dash mount.

Feature:

• 8-Pin USB Adapter
• Use to Retain the OE USB Port On Select Nissan Vehicles
• In Addition We Include an RCA

This 4 pin USB Port Retention Harness for select 2010 and up Nissan vehicles allows you to install an aftermarket stereo that utilizes a rear USB input and retain the rear USB input port.

Feature:

• 4-Pin USB Adapter
• Use to Retain the OE USB Port on Select Nissan Vehicles
• Applications: Nissan Altima 2010-2013 Nissan Leaf 2011-2012
• Nissan Maxima 2010-2013 Nissan Murano (Plus Cross Cabriolet) 2011-2012
• Nissan Quest 2011-2013 Nissan Rogue 2011-2013 Nissan Sentra 2010-2012