2 Channel Adjustable Differential Line Out Converter with Amp Turn On allows you to install line level input products into a vehicles stereo system by converting speaker wire inputs to RCA outputs. Features DC amplifier turn on trigger EIA color coded inputs a compact convenient outer case for easy installation and ABS plastic vinyl and aluminum materials to enhance durability. 80 Watts maximum input. Feature:
|
|
This non-amplified non-Onstar Interface wiring harness for select 2006 and up GM LAN vehicles is designed to provide a 12 volt 10 amp switched accessory output along with the rest of the wires needed to install an aftermarket radio and retain the Retained Accessory Power function. Includes a direct plug-in for the Universal Steering Wheel Control Interface and also provides VSS parking brake and reverse signals to an aftermarket navigation receiver making the installation easier. Feature:
|
This Data Interface Harness for select 2006 to 2012 GM vehicles without amplified systems lets you replace the factory radio and install an aftermarket stereo to the factory wiring and retain your factory warning chimes and other audible safety warnings R.A.P. |Retained Accessory Power| and provides a 12 volt|3 amp accessory output.
|
Install an aftermarket radio with navigation functionality using this handy installation kit that's designed for use with 2006 and later Ford vehicles. Wires are provided for VSS reverse and parking break to cut down on installation time. Feature:
|
The GM 29Bit LAN Data Interface from Axxess provides accessory power and retains RAP |if equipped|. It can be used in nonamplified systems or when removing amplified systems. It also retains warning chimes. Feature:
|
This 4 pin USB Port Retention Harness for select 2010 and up Nissan vehicles allows you to install an aftermarket stereo that utilizes a rear USB input and retain the rear USB input port. Feature:
|
|
This interface is used when replacing the OEM radio with an aftermarket radio. Provides navigation outputs parking brake reverse speed sense. Interface is designed for non-amplified and amplified models. Requires the AX-HYKIA-SPDIF sold separately. Interface retains audio controls on the steering wheel and retains BlueLink. Works in select 2012-16 Hyundai Veloster vehicles. Feature:
|
|
When installing an aftermarket stereo in Ford Lincoln and Mercury vehicles this 12 Volt to 5 Volt Converter takes a normal 12 volt turn on from an aftermarket stereo and drops it down to 5 volts which the factory amplifier handles better for an easier and quieter start. A 3 wire hook up makes the converter simple to install. Feature:
|
This Universal 2 Channel adjustable Mini Line Output Converter |LOC| with built in amplifier remote generator is designed to convert two channels of speaker level audio into two channels of line level audio that can be used by OEM amplifiers. It can also be used with OEM radios to add aftermarket amplifiers. This device will also detect the presence of an audio signal and then generate a plus 12V output that can be used to turn on an aftermarket amplifier. 150 Watt Max per channel. Feature:
|
This interface provides Vehicle Speed Sense (VSS) parking brake and a reverse wire output for an aftermarket radio with navigation. ABS plastic copper vinyl and aluminum materials ensure long-lasting durability. Feature:
|
This non-amplified interface wiring harness for select 2006 to 2008 Chrysler vehicles is designed to provide a 12 volt 10 amp switched accessory output along with the rest of the wires needed to install an aftermarket radio and retain the Retained Accessory Power function. Includes a direct plug-in for the Universal Steering Wheel Control Interface and also provides VSS parking brake and reverse signals to an aftermarket navigation receiver making the installation easier. Feature:
|
This Non-amplified non Onstar Interface wiring harness for select 2004 and up GM vehicles is designed to provide a 12 volt 10 amp switched accessory output along with the rest of the wires needed to install an aftermarket radio and retain the Retained Accessory Power function. Includes a direct plug in for the Universal Steering Wheel Control Interface and also provides VSS parking brake and reverse signals to an aftermarket navigation receiver making the installation easier. Feature:
|
This non-amplified non Onstar interface wiring harness for select 2000 and up GM CL2 vehicles allows you to install an aftermarket car stereo and retain accessory power and also provides navigation output wires 12V DC accessory output VSS parking brake and reverse outputs. Feature:
|
This non-amplified non-Onstar interface wiring harness for select 2011 and up Ford vehicles is designed to provide a 12 volt 10 amp switched accessory output along with the rest of the wires needed to install an aftermarket radio and retain the Retained Accessory Power function. Includes a direct plug in for the Universal Steering Wheel Control Interface and also provides VSS parking brake and reverse signals to an aftermarket navigation receiver making the installation easier. Feature:
|
|
This 8 pin USB Port Retention Harness for select 2011 and up Nissan vehicles allows you to install an aftermarket stereo and retain the rear USB input port on your aftermarket radio by plugging directly into the factory USB and then to the aftermarket stereo. 6 ft. Long. Includes under dash mount. Feature:
|
This Amplifier Interface Harness for select 1997 to 2004 Chevrolet vehicles allows you to install an aftermarket car stereo and retain the Retained Accessory Power function where power is supplied to the radio after the ignition is shut off until one of the doors are opened Harness will also retain the amplified door woofers through the use of a differential line converter. This helps eliminate turn on|off pops and allows the user to adjust the level of the door woofers.
|
This Back-Up Camera Interface Harness for select 2014 and up GMC and Chevrolet vehicles allows you to retain the factory installed backup camera when you install a new car stereo. Compatible with display and navigation model radios only. |Will not work in Base model vehicles with an I03 radio|
|
This Wiring Interface Harness for select 2006 to 2013 BMW and 2007 to 2014 Mini Cooper vehicles without amplified systems lets you replace the factory radio and install an aftermarket radio to the factory wiring and retain your factory warning chimes an important safety feature. Harness can also be used in your Mini or BMW vehicle if you plan on replacing the factory amplifier. Feature:
|
|
This Data Interface Harness for select 1996 to 2001 Cadillac vehicles lets you replace the factory radio and install an aftermarket stereo to the factory wiring and retain your factory warning chimes and other audible safety warnings R.A.P. |Retained Accessory Power| and provides a 12 volt|3 amp accessory output. The interface uses an onboard speaker to produce all warning chimes and works with non amplified systems or when bypassing an amplified system.
|
Interface designed to allow for the replacement of the OEM Radio with an aftermarket unit in amplified Cadillac vehicles with Premium or Bose audio systems. Retains full functionality of the OnStar system with adjustable volume output. Feature:
|
|
Backup Camera and RSE Retention Harness for select 2008 to 2013 Chrysler Dodge and Jeep vehicles allows you to install an aftermarket radio and retain the factory rear seat entertainment system and backup camera. Provides two Audio and Video signals to be sent to the RSE System. This harness must be used in conjunction with the Axxess XSVI 6522 NAV CHTO 03 or the CHTO 013 Radio Replacement Module. Feature:
|
This data interface for select 2004 and up Chrysler vehicles provides accessory power |12 volt 10 amp| retains R.A.P. |retained accessory power| provides NAV outputs |Parking Brake Reverse and Speed Sense| and can be used in both amplified and non amplified models. Feature:
|
This Data Interface with Steering Wheel Controls for select 2004 and up Chrysler vehicles allows you to easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions. Retains audio controls on the steering wheel and safety chimes. Feature:
|
Radio Replacement Interface Module The Axxess LCCHRC01 interface is designed to allow you to replace the factory radio of select Chrysler vehicles with an aftermarket head unit while retaining many factory features that are normally lost when the factory radio is removed. Can be used in vehicles with no factory amplifier or in vehicles when bypassing the factory amplifier. Retains your vehicle's factory park assist chimes if equipped through an onboard speaker in the interface module. Feature:
|
This Data Interface with Steering Wheel Controls for select 2013 and up Chrysler vehicles allows you to easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions. Retains R.A.P. |retained accessory power| audio controls on the steering wheel and safety chimes and provides accessory power |12 volt 10 amp|. Can be used in non amplified models or when bypassing a factory amplifier |except in Fiat 500L| Feature:
|
.in AXGM-10 Cadillac 03-06 Amplified Onstar Interface
Provides accessory power (12-volt 10-amp) Retains R.A.P. (Retained Accessory Power) / Used in amplified systems / Retains chimes / Provides NAV outputs (parking brake reverse mute and speed sense) / Retains OnStar/OE Bluetooth / Micro-B USB updatable / Replacing GMOS-10 .in |
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |