Shop by Brand: CIPA

CIPA's Economy Marine Mirror measures 2.5 x 8 inches and has a convex mirror surface to provide a wide viewing angle. The universal quick mounting system gives this mirror multiple mounting options. It can be mounted above or below the windshield, or to the dashboard. Windshield installation is easy and requires no tools. Fits round or square frames up to 7/8". The Economy Marine Mirror helps to eliminate blind spots, and provides added safety and situational awareness with a euro styling.

• Measures 2.5 x 8 inches and has a convex mirror surface to provide a wide viewing angle
• Universal quick mounting system gives this mirror multiple mounting options. It can be mounted above or below the windshield, or to the dashboard
• Windshield installation is easy and requires no tools
• Fits round or square windshield frames up to 7/8 of an inch
• Helps to eliminate blind spots, and provides added safety and situational awareness with a euro styling
• Limited 1 Year Warranty

EVO Formance LED Ultrabrights are brighter than neon. LED Ultrabrights use super high output flat LEDs that radiate intense 180 degree illumination with no hot spots. LEDs offer richer color depth (6000K) when compared to neon lights. The Ultrabrights are extremely thin (1/8 of an inch) and flexible which allows for easy, discrete installations. The Ultrabrights are encapsulated in a tough resin that makes them 100% waterproof. The LEDs do not require transformers. Simply connect them directly to any 12 volt power source. The LED Ultrabrights have a life expectancy of 2000+ hours. Package includes 1 strip and step by step instructions. For off road and decorative use only. Check state and local laws. Don't Change... Evolve

• Forget about neon - LED Ultrabrights are ultra-LEDs with maximum intensity that shines brighter than neon
• LED Ultrabrights radiate intense 180 degree illumination
• Flexible and easy to hide 15" strip
• Easy 12V installation with step by step instructions included
• 100% waterproof - For interior or exterior use
• Limited - 30 Days

EVO Formance LED Ultrabrights are brighter than neon. LED Ultrabrights use super high output flat LEDs that radiate intense 180 degree illumination with no hot spots. LEDs offer richer color depth (10000K) when compared to neon lights. The Ultrabrights are extremely thin (1/8 of an inch) and flexible which allows for easy, discrete installations. The Ultrabrights are encapsulated in a tough resin that makes them 100% waterproof. The LEDs do not require transformers. Simply connect them directly to any 12 volt power source. The LED Ultrabrights have a life expectancy of 2000+ hours. Package includes 1 strip and step by step instructions. For off road and decorative use only. Check state and local laws. Don't Change... Evolve

• Forget about neon - LED Ultrabrights are ultra-LEDs with maximum intensity that shines brighter than neon
• LED Ultrabrights radiate intense 180 degree illumination
• Flexible and easy to hide 8" strip
• Easy 12V installation with step by step instructions included
• 100% waterproof - For interior or exterior use
• Limited-30 Days

EVO Formance LED Ultrabrights are brighter than neon. LED Ultrabrights use super high output flat LEDs that radiate intense 180 degree illumination with no hot spots. LEDs offer richer color depth when compared to neon lights. The Ultrabrights are extremely thin (1/8 of an inch) and flexible which allows for easy, discrete installations. The Ultrabrights are encapsulated in a tough resin that makes them 100% waterproof. The LEDs do not require transformers. Simply connect them directly to any 12 volt power source. The LED Ultrabrights have a life expectancy of 2000+ hours. Package includes 1 strip and step by step instructions. For off road and decorative use only. Check state and local laws. Don't Change... Evolve

• Forget about neon - LED Ultrabrights are ultra-LEDs with maximum intensity that shines brighter than neon
• LED Ultrabrights radiate intense 180 degree illumination
• Flexible and easy to hide 8" strip
• Easy 12V installation with step by step instructions included
• 100% waterproof - For interior or exterior use
• Limited- 30 Days

EVO Formance LED Ultrabrights are brighter than neon. LED Ultrabrights use super high output flat LEDs that radiate intense 180 degree illumination with no hot spots. LEDs offer richer color depth (6000K) when compared to neon lights. The Ultrabrights are extremely thin (1/8 of an inch) and flexible which allows for easy, discrete installations. The Ultrabrights are encapsulated in a tough resin that makes them 100% waterproof. The LEDs do not require transformers. Simply connect them directly to any 12 volt power source. The LED Ultrabrights have a life expectancy of 2000+ hours. Package includes 1 strip and step by step instructions. For off road and decorative use only. Check state and local laws. Don't Change... Evolve

• Forget about neon - LED Ultrabrights are ultra-LEDs with maximum intensity that shines brighter than neon
• LED Ultrabrights radiate intense 180 degree illumination
• Flexible and easy to hide 8" strip
• Easy 12V installation with step by step instructions included
• 100% waterproof - For interior or exterior use
• Limited- 30 Days

EVO Formance Alfas Maximum Intensity 9004 Halogen Headlight Bulbs are the best approximation to a full HID Xenon lighting system. Alfas can be installed on any vehicle without modifications, complications, or the excessive costs of an HID system. Their maximum illumination and Intense-White color is due to the quality of materials, the unique combination of gases, and a special tungsten filament that is made in Japan. Alfas emit a pure white light that is rated at 5500K. Standard headlight bulbs emit a yellow light between 2700K - 3300K. Alfas Maximum Intensity bulbs emit between 2100 lm - 2300 lm of light. Standard headlight bulbs emit between 1000 lm - 1100 lm of light. The bulbs are constructed using quartz. Quartz is more transparent than normal glass. This results in more light emission and can be subjected to higher temperatures without shattering. Alfas operate using a 12 volt power supply and consume about 85 watts of power. The Alfas' wiring harness uses heat resistant 14 gauge wires. This helps reduce any resistance between the vehicles existing socket and the Alfas bulb. They also use a unique ceramic socket that helps isolate heat so there is no risk of an Alfas bulb damaging the vehicles existing electrical installations. Simply remove your existing bulb and install the Alfas bulb. Experience plug and play brightness that will not melt or damage your vehicle's existing components. For off road and decorative use only. Check state and local laws. Don't Change... Evolve

• The best approximation to a full HID Xenon lighting system
• Alfas emit a pure white light that is rated at 5500K, Standard headlight bulbs emit a yellow light between 2700K - 3300K
• Constructed using quartz and heat resistant 14 gauge wires
• Unique ceramic socket helps isolate heat so there is no risk of damaging the vehicles existing electrical installations
• Simply remove your existing bulb and install the Alfas bulb
• Limited 30 Days

EVO Formance 9005 Alfas Maximum Intensity 9005 Halogen Headlight bulbs are the best approximation to a full HID Xenon lighting system. Alfas can be installed on any vehicle without modifications, complications, or the excessive costs of an HID system. Their maximum illumination and Intense-White color is due to the quality of materials, the unique combination of gases, and a special tungsten filament that is made in Japan. Alfas emit a pure white light that is rated at 5500K. Standard headlight bulbs emit a yellow light between 2700K - 3300K. Alfas Maximum Intensity bulbs emit between 2100 lm - 2300 lm of light. Standard headlight bulbs emit between 1000 lm - 1100 lm of light. The bulbs are constructed using quartz. Quartz is more transparent than normal glass. This results in more light emission and can be subjected to higher temperatures without shattering. Alfas operate using a 12 volt power supply and consume about 85 watts of power. The Alfas' wiring harness uses heat resistant 14 gauge wires. This helps reduce any resistance between the vehicles existing socket and the Alfas bulb. They also use a unique ceramic socket that helps isolate heat so there is no risk of an Alfas bulb damaging the vehicles existing electrical installations. Simply remove your existing bulb and install the Alfas bulb. Experience plug and play brightness that will not melt or damage your vehicle's existing components. For off road and decorative use only. Check state and local laws. Don't Change... Evolve

• The best approximation to a full HID Xenon lighting system
• Alfas emit a pure white light that is rated at 5500K, Standard headlight bulbs emit a yellow light between 2700K - 3300K
• Constructed using quartz and heat resistant 14 gauge wires
• Unique ceramic socket helps isolate heat so there is no risk of damaging the vehicles existing electrical installations
• Simply remove your existing bulb and install the Alfas bulb
• Limited 30 Days

EVO Formance Alfas Maximum Intensity 9006 Halogen Headlight Bulbs are the best approximation to a full HID Xenon lighting system. Alfas can be installed on any vehicle without modifications, complications, or the excessive costs of an HID system. Their maximum illumination and Intense-White color is due to the quality of materials, the unique combination of gases, and a special tungsten filament that is made in Japan. Alfas emit a pure white light that is rated at 5500K. Standard headlight bulbs emit a yellow light between 2700K - 3300K. Alfas Maximum Intensity bulbs emit between 2100 lm - 2300 lm of light. Standard headlight bulbs emit between 1000 lm - 1100 lm of light. The bulbs are constructed using quartz. Quartz is more transparent than normal glass. This results in more light emission and can be subjected to higher temperatures without shattering. Alfas operate using a 12 volt power supply and consume about 85 watts of power. The Alfas' wiring harness uses heat resistant 14 gauge wires. This helps reduce any resistance between the vehicles existing socket and the Alfas bulb. They also use a unique ceramic socket that helps isolate heat so there is no risk of an Alfas bulb damaging the vehicles existing electrical installations. Simply remove your existing bulb and install the Alfas bulb. Experience plug and play brightness that will not melt or damage your vehicle's existing components. For off road and decorative use only. Check state and local laws. Don't Change... Evolve

• The best approximation to a full HID Xenon lighting system
• Alfas emit a pure white light that is rated at 5500K, Standard headlight bulbs emit a yellow light between 2700K - 3300K
• Constructed using quartz and heat resistant 14 gauge wires
• Unique ceramic socket helps isolate heat so there is no risk of damaging the vehicles existing electrical installations
• Simply remove your existing bulb and install the Alfas bulb
• Limited 30 Days

EVO Formance Alfas Maximum Intensity 9007 Halogen Headlight Bulbs are the best approximation to a full HID Xenon lighting system. Alfas can be installed on any vehicle without modifications, complications, or the excessive costs of an HID system. Their maximum illumination and Intense-White color is due to the quality of materials, the unique combination of gases, and a special tungsten filament that is made in Japan. Alfas emit a pure white light that is rated at 5500K. Standard headlight bulbs emit a yellow light between 2700K - 3300K. Alfas Maximum Intensity bulbs emit between 2100 lm - 2300 lm of light. Standard headlight bulbs emit between 1000 lm - 1100 lm of light. The bulbs are constructed using quartz. Quartz is more transparent than normal glass. This results in more light emission and can be subjected to higher temperatures without shattering. Alfas operate using a 12 volt power supply and consume about 85 watts of power. The Alfas' wiring harness uses heat resistant 14 gauge wires. This helps reduce any resistance between the vehicles existing socket and the Alfas bulb. They also use a unique ceramic socket that helps isolate heat so there is no risk of an Alfas bulb damaging the vehicles existing electrical installations. Simply remove your existing bulb and install the Alfas bulb. Experience plug and play brightness that will not melt or damage your vehicle's existing components. For off road and decorative use only. Check state and local laws. Don't Change... Evolve

• The best approximation to a full HID Xenon lighting system
• Alfas emit a pure white light that is rated at 5500K, Standard headlight bulbs emit a yellow light between 2700K - 3300K
• Constructed using quartz and heat resistant 14 gauge wires
• Unique ceramic socket helps isolate heat so there is no risk of damaging the vehicles existing electrical installations
• Simply remove your existing bulb and install the Alfas bulb
• Limited 30 Days

EVO Formance Alfas Maximum Intensity H1 Halogen Headlight Bulbs are the best approximation to a full HID Xenon lighting system. Alfas can be installed on any vehicle without modifications, complications, or the excessive costs of an HID system. Their maximum illumination and Intense-White color is due to the quality of materials, the unique combination of gases, and a special tungsten filament that is made in Japan. Alfas emit a pure white light that is rated at 5500K. Standard headlight bulbs emit a yellow light between 2700K - 3300K. Alfas Maximum Intensity bulbs emit between 2100 lm - 2300 lm of light. Standard headlight bulbs emit between 1000 lm - 1100 lm of light. The bulbs are constructed using quartz. Quartz is more transparent than normal glass. This results in more light emission and can be subjected to higher temperatures without shattering. Alfas operate using a 12 volt power supply and consume about 85 watts of power. The Alfas' wiring harness uses heat resistant 14 gauge wires. This helps reduce any resistance between the vehicles existing socket and the Alfas bulb. They also use a unique ceramic socket that helps isolate heat so there is no risk of an Alfas bulb damaging the vehicles existing electrical installations. Simply remove your existing bulb and install the Alfas bulb. Experience plug and play brightness that will not melt or damage your vehicle's existing components. For off road and decorative use only. Check state and local laws. Don't Change... Evolve

• The best approximation to a full HID Xenon lighting system
• Alfas emit a pure white light that is rated at 5500K, Standard headlight bulbs emit a yellow light between 2700K - 3300K
• Constructed using quartz and heat resistant 14 gauge wires
• Unique ceramic socket helps isolate heat so there is no risk of damaging the vehicles existing electrical installations
• Simply remove your existing bulb and install the Alfas bulb
• Limited 30 Days

EVO Formance Alfas Maximum Intensity H11 Halogen Headlight Bulbs are the best approximation to a full HID Xenon lighting system. Alfas can be installed on any vehicle without modifications, complications, or the excessive costs of an HID system. Their maximum illumination and Intense-White color is due to the quality of materials, the unique combination of gases, and a special tungsten filament that is made in Japan. Alfas emit a pure white light that is rated at 5500K. Standard headlight bulbs emit a yellow light between 2700K - 3300K. Alfas Maximum Intensity bulbs emit between 2100 lm - 2300 lm of light. Standard headlight bulbs emit between 1000 lm - 1100 lm of light. The bulbs are constructed using quartz. Quartz is more transparent than normal glass. This results in more light emission and can be subjected to higher temperatures without shattering. Alfas operate using a 12 volt power supply and consume about 85 watts of power. The Alfas' wiring harness uses heat resistant 14 gauge wires. This helps reduce any resistance between the vehicles existing socket and the Alfas bulb. They also use a unique ceramic socket that helps isolate heat so there is no risk of an Alfas bulb damaging the vehicles existing electrical installations. Simply remove your existing bulb and install the Alfas bulb. Experience plug and play brightness that will not melt or damage your vehicle's existing components. For off road and decorative use only. Check state and local laws. Don't Change... Evolve

• The best approximation to a full HID Xenon lighting system
• Alfas emit a pure white light that is rated at 5500K, Standard headlight bulbs emit a yellow light between 2700K - 3300K
• Constructed using quartz and heat resistant 14 gauge wires
• Unique ceramic socket helps isolate heat so there is no risk of damaging the vehicles existing electrical installations
• Simply remove your existing bulb and install the Alfas bulb
• Limited 30 Days

EVO Formance Alfas Maximum Intensity H3 Halogen Headlight Bulbs are the best approximation to a full HID Xenon lighting system. Alfas can be installed on any vehicle without modifications, complications, or the excessive costs of an HID system. Their maximum illumination and Intense-White color is due to the quality of materials, the unique combination of gases, and a special tungsten filament that is made in Japan. Alfas emit a pure white light that is rated at 5500K. Standard headlight bulbs emit a yellow light between 2700K - 3300K. Alfas Maximum Intensity bulbs emit between 2100 lm - 2300 lm of light. Standard headlight bulbs emit between 1000 lm - 1100 lm of light. The bulbs are constructed using quartz. Quartz is more transparent than normal glass. This results in more light emission and can be subjected to higher temperatures without shattering. Alfas operate using a 12 volt power supply and consume about 85 watts of power. The Alfas' wiring harness uses heat resistant 14 gauge wires. This helps reduce any resistance between the vehicles existing socket and the Alfas bulb. They also use a unique ceramic socket that helps isolate heat so there is no risk of an Alfas bulb damaging the vehicles existing electrical installations. Simply remove your existing bulb and install the Alfas bulb. Experience plug and play brightness that will not melt or damage your vehicle's existing components. For off road and decorative use only. Check state and local laws. Don't Change... Evolve

• The best approximation to a full HID Xenon lighting system
• Alfas emit a pure white light that is rated at 5500K, Standard headlight bulbs emit a yellow light between 2700K - 3300K
• Constructed using quartz and heat resistant 14 gauge wires
• Unique ceramic socket helps isolate heat so there is no risk of damaging the vehicles existing electrical installations
• Simply remove your existing bulb and install the Alfas bulb
• Limited 30 Days

EVO Formance Alfas Maximum Intensity H4 Halogen Headlight Bulbs are the best approximation to a full HID Xenon lighting system. Alfas can be installed on any vehicle without modifications, complications, or the excessive costs of an HID system. Their maximum illumination and Intense-White color is due to the quality of materials, the unique combination of gases, and a special tungsten filament that is made in Japan. Alfas emit a pure white light that is rated at 5500K. Standard headlight bulbs emit a yellow light between 2700K - 3300K. Alfas Maximum Intensity bulbs emit between 2100 lm - 2300 lm of light. Standard headlight bulbs emit between 1000 lm - 1100 lm of light. The bulbs are constructed using quartz. Quartz is more transparent than normal glass. This results in more light emission and can be subjected to higher temperatures without shattering. Alfas operate using a 12 volt power supply and consume about 85 watts of power. The Alfas' wiring harness uses heat resistant 14 gauge wires. This helps reduce any resistance between the vehicles existing socket and the Alfas bulb. They also use a unique ceramic socket that helps isolate heat so there is no risk of an Alfas bulb damaging the vehicles existing electrical installations. Simply remove your existing bulb and install the Alfas bulb. Experience plug and play brightness that will not melt or damage your vehicle's existing components. For off road and decorative use only. Check state and local laws. Don't Change... Evolve

• The best approximation to a full HID Xenon lighting system
• Alfas emit a pure white light that is rated at 5500K, Standard headlight bulbs emit a yellow light between 2700K - 3300K
• Constructed using quartz and heat resistant 14 gauge wires
• Unique ceramic socket helps isolate heat so there is no risk of damaging the vehicles existing electrical installations
• Simply remove your existing bulb and install the Alfas bulb
• Limited 30 Days

EVO Formance Alfas Maximum Intensity H7 Halogen Headlight Bulbs are the best approximation to a full HID Xenon lighting system. Alfas can be installed on any vehicle without modifications, complications, or the excessive costs of an HID system. Their maximum illumination and Intense-White color is due to the quality of materials, the unique combination of gases, and a special tungsten filament that is made in Japan. Alfas emit a pure white light that is rated at 4300K. Standard headlight bulbs emit a yellow light between 2700K - 3300K. Alfas Maximum Intensity bulbs emit between 2100 lm - 2300 lm of light. Standard headlight bulbs emit between 1000 lm - 1100 lm of light. The bulbs are constructed using quartz. Quartz is more transparent than normal glass. This results in more light emission and can be subjected to higher temperatures without shattering. Alfas operate using a 12 volt power supply and consume about 85 watts of power. The Alfas' wiring harness uses heat resistant 14 gauge wires. This helps reduce any resistance between the vehicles existing socket and the Alfas bulb. They also use a unique ceramic socket that helps isolate heat so there is no risk of an Alfas bulb damaging the vehicles existing electrical installations. Simply remove your existing bulb and install the Alfas bulb. Experience plug and play brightness that will not melt or damage your vehicle's existing components. For off road and decorative use only. Check state and local laws. Don't Change... Evolve

• The best approximation to a full HID Xenon lighting system
• Alfas emit a pure white light that is rated at 4300K, Standard headlight bulbs emit a yellow light between 2700K - 3300K
• Constructed using quartz and heat resistant 14 gauge wires
• Unique ceramic socket helps isolate heat so there is no risk of damaging the vehicles existing electrical installations
• Simply remove your existing bulb and install the Alfas bulb
• Limited 30 Days

EVO Formance LED Bullet Strobes are the only headlight strobes that require no installation hassles. Plug n' play design allows you to simply replace any existing 194 (T-10) bulb with a Bullet Strobe and you're done. There are no wires, no transformers, and no controllers. Each Bullet Strobe is completely self-contained and programmed to emit a powerful "triple-flash" strobe pattern. Each one uses an overpowered, high intensity 1 Watt LED. Turn the strobe on and off with existing vehicle parking light switch. The T-10 Bullet Strobes have a life expectancy of 2000+ hours. Matching headlamps and other EVO lighting accessories are available in the same crisp Ultra-White 6000K color for a complete customized look. Package includes 2 bullets and step by step instructions. For off road and decorative use only. Check state and local laws.

• Powerful LED Strobes with Triple-flash strobe pattern
• 100% Plug and Play
• No modifications required
• High-intensity 1 watt LED
• 12V Installation (Step by step instructions included)
• Limited 30 Days

EVO Formance Bullets are simply the most powerful LED wedge 194 (T-10) replacement bulb on the market. Each bulb uses an ultra-intense pair of LEDs that consume a total of 1 Watt of power. One watt may not sound like a lot, but when applied to an LED it equals a tremendous amount of light output. In addition, Bullets have a smooth 180 degree illumination with no hot spots. EVO Formance Bullets are made to fit any existing wedge 194 (T-10) socket on the vehicle, and have a life expectancy of 2000+ hours . Applications will vary with vehicle make and model. Matching headlamps and other EVO lighting accessories are available in the same cold blue color for a complete customized look. Package includes 2 bulbs and step by step instuctions. For off road and decorative use only. Check state and local laws.

• Universal Installation on all existing vehicle wedge 194 (T-10) sockets
• Full 180 degree uniform illumination
• 1 Watt of LED power consumption
• Long life expectancy of around 25,000 to 50,000 hours due to low heat production, and minimal power draw
• Matching headlamps and other EVO lighting accessories are available in the same cold blue color for a complete customized look
• Limited 30 Days

EVO Formance Bullets are simply the most powerful LED wedge 194 (T-10) replacement bulb on the market. Each bulb uses an ultra-intense pair of LEDs that consume a total of 1 Watt of power. One watt may not sound like a lot, but when applied to an LED it equals a tremendous amount of light output. In addition, Bullets have a smooth 180 degree illumination with no hot spots. EVO Formance Bullets are made to fit any existing wedge 194 (T-10) socket on the vehicle, and have a life expectancy of 2000+ hours. Applications will vary with vehicle make and model. Matching headlamps and other EVO lighting accessories are available in the same crisp Ultra-White 6000K color for a complete customized look. Package includes 2 bulbs and step by step instructions. For off road and decorative use only. Check state and local laws.

• Universal Installation on all existing vehicle wedge 194 (T-10) sockets
• Full 180 degree uniform illumination
• 1 Watt of LED power consumption
• Long life expectancy of around 25,000 to 50,000 hours due to low heat production, and minimal power draw
• Matching headlamps and other EVO lighting accessories are available in the same ultra white color for a complete customized look
• Limited 30 Days

What happens when you put a 3 WATT LED in a vehicle dome light? Daylight! Finally, 3 WATT LEDs hit a price level and operating temperature level that is low enough to implement into a dome light. EVO uses an acrylic lens to help diffuse the light that is being emitted. Also included is 4 adapters that will fit virtually any vehicle socket. The EVO Formance Elite Dome Light is a truly universal, plug n' play interior vehicle light. The small 25mm x 30mm lighting plate allows for a universal fit in a majority of vehicle dome lights whereas larger LED plates are more vehicle specific. The Elite Dome Light offers maximum intensity and projects a modern Ultra-White tone of light (6000K) through one 3 WATT high diffusion, high output LED. It's like having HID inside your car! The LED in the Elite Dome Light is mounted to a firm circuit board and has a built-in current limiting resistor, that protects the LED from reversed polarity. Not only does the Elite Dome Light have a current limiting resistor, it also has a constant-current driver that provides protection from currents that are too high, which can happen when igniting the vehicle, or in older vehicles that just have high currents. The constant-current driver can automatically reduce the current to a safe range offering protection for the dome light and the socket. It is also sensor safe and will not activate warning lights. This LED dome light is a simple plug n' play installation with no wiring or drilling required. It has a life expectancy of 2000+ hours. Matching headlamps and other EVO lighting accessories are available in the same crisp Ultra-White color for a complete customized look. Package includes 1 dome light, 4 socket adaptors, 1 adhesive foam pad, and step by step instructions. For DC 12 volt power systems only. Don't Change... Evolve

• One 3 WATT high diffusion, high output light for maximum intensity
• Includes 4 styles of adaptors for all socket types
• Modern Ultra-White tone with better light diffusion and higher light intensity
• Features a built-in current limiting resistor to protect the LED from reversed polarity, and a constant-current driver to automatically regulate vehicle current to a safe level
• Like having HID inside your car
• Limited - 30 Days

EVO Formance Neon EVO Eyes create a brilliant ring of blue light around virtually any headlight giving your vehicle a high-end and aggressive look. They are made of high temperature resistant materials so they will not melt when mounted inside the vehicle's headlight housing. EVO Eyes are CCFL rings that were designed to allow for a universal fit inside almost any existing vehicle headlight housing. A heat gun is required for installation to remove the vehicle's headlight lens from the housing. Once the installation is complete, use the heat gun to re-seal the lens back onto the headlight. No extra glue or silicone is required. The ballast is completely sealed and totally waterproof. It can be safely installed anywhere on the interior or exterior of the vehicle. The rings are also shock resistant and operational in extreme temperatures. Perfect for tricking out your car, truck, or motorcycle. EVO Formance EVO Eyes are based on Ultrabright technology and are rated at 10000K. Neon Ultrabrights are much brighter than regular neon tubes and are clearly visible day or night. Included brackets allow for a wide range of mounting options inside any headlight. Package includes 2 - 9 cm Eyes, 2 mounting brackets, and step by step instructions. Don't Change... Evolve

• 12V Universal installation (Instructions included)
• Shock resistant
• Operational in extreme temperatures
• Ultrabright technology makes them much brighter than regular neon rings
• Do not melt inside the headlight like other brands
• Limited-30 Days

9 cm Neon EVO Eyes - Creates a brilliant ring of white light around virtually any headlight giving your vehicle a high-end and aggressive look. Mounting bracket included.

Features:
• 12V Universal installation (Instructions included)
• Shock resistant
• Operational in extreme temperatures
• Ultrabright technology makes them much brighter than regular neon rings
• Do not melt inside the headlight like other brands

EVO Formance Neon EVO Eyes create a brilliant ring of blue light around virtually any headlight giving your vehicle a high-end and aggressive look. They are made of high temperature resistant materials so they will not melt when mounted inside the vehicle's headlight housing. EVO Eyes are CCFL rings that were designed to allow for a universal fit inside almost any existing vehicle headlight housing. A heat gun is required for installation to remove the vehicle's headlight lens from the housing. Once the installation is complete, use the heat gun to re-seal the lens back onto the headlight. No extra glue or silicone is required. The ballast is completely sealed and totally waterproof. It can be safely installed anywhere on the interior or exterior of the vehicle. The rings are also shock resistant and operational in extreme temperatures. Perfect for tricking out your car, truck, or motorcycle. EVO Formance EVO Eyes are based on Ultrabright technology and are rated at 10000K. Neon Ultrabrights are much brighter than regular neon tubes and are clearly visible day or night. Included brackets allow for a wide range of mounting options inside any headlight. Package includes 2 - 12cm Eyes, 2 mounting brackets, and step by step instructions. Don't Change... Evolve

• 12V Universal installation (Instructions included)
• Shock resistant
• Operational in extreme temperatures
• Ultrabright technology makes them much brighter than regular neon rings
• Do not melt inside the headlight like other brands
• Limited- 30 Days

EVO Formance headlight strobes offer an excellent level of intensity at a very affordable price. The kit comes complete with headlight strobe, mounting screws, and ballast. Each bulb has a unique threaded wedge base that allows for a snug fit into a variety of hole shapes and sizes. Threaded wedge base provides for easy installation by allowing them to twist into a headlights housing, while creating a watertight seal. This makes installation much easier. The Headlight strobes have a fast triple flash, wig-wag strobe pattern with a color temperature of 6000K. The life expectancy is rated at 2000+ hours. The ballast is completely waterproof and can be installed anywhere on the exterior of the vehicle. Requires a DC 12 volt power system. Package includes 2 bulbs and step by step instructions. For off road and decorative use only. Check state and local laws.

• Fast, Triple-Flash, Wig-Wag strobe pattern
• Threaded wedge base for easy screw-in installation
• Two port weather proof power supply
• Long Bulb life
• Easy 12V installation (Step by step instructions included)
• Limited 30- Days

EVO Formance blue LED T-10 bulbs use 4 high intensity forward projecting LEDs for intense illumination. They are made to fit any existing wedge 194 (T-10) socket on the vehicle. Applications will vary with vehicle make and model. Common applications include headlight marker lights, side marker lights, dash lights, interior lights and license plate lights. The LED T-10 bulb has a long life expectancy of 2000+ hours due to low heat production and minimal power draw of only 5 watts. Matching headlamps and other EVO lighting accessories are available in the same cold blue color for a complete customized look. Installation requires a 12 volt power source. Package includes 2 bulbs and Step by step instructions. For off road and decorative use only. Check state and local laws.

• Replaces all 194 and T-10 Bulbs
• Utilizes 4 projection LEDs for intense forward marker illumination
• Long life expectancy of around 25,000 to 50,000 hours due to low heat production and minimal power draw
• Matching headlamps and other EVO lighting accessories are available in the same cold blue color for a complete customized look
• Sold as a Pair, instructions included
• Limited 30 Days

The LED Cop Strobes are powerful and professional grade strobes. Each bulb emits more than 300lm of light. The strobes use a new type of LED that is big and flat, and a new base that allows them to twist into position in virtually any vehicle. They were designed with an aluminum base with a specially designed bulb to allow light to be emitted in all directions simultaneously; taking maximum advantage of the vehicle's headlight reflectors. LEDs are much more durable than regular lights. In addition to that, the control box and strobe bulb housings are constructed of durable materials that make them waterproof and impact resistant. Other benefits are that the life of the LED bulb is much greater than a regular bulb. The estimated life span is rated at 2000+ hours. The LED Cop Strobes are programmed with 5 different flashing strobe sequences that are controlled by a dome-cap micro-controller, which installs on the inside of the vehicle. The Cop Strobes include 2 LED strobe bulbs, 1 transformer box, 1 controller, 2 mounting screws, 1 EVO Formance sticker, and step by step instructions. Please note: Installation requires knowledge of 12V electrical systems. If you are not familiar with 12V electrical systems, please seek assistance from you local automotive installation center. For off road and decorative use only. Check state and local laws. Don't change... Evolve

• Powerful, professional strobes made to fit virtually any vehicle
• Specially designed bulbs outputs light in all directions
• Over 300lm per bulb with higher intensity and better diffusion
• 5 different flashing strobe sequences controlled with included dome-cap micro-controller
• Waterproof and impact resistant control box and strobe bulbs
• Limited - 30 Days

Replace existing incandescent bulbs with high intensity true blue LEDs. These bulbs replace T5 bulbs that are found behind virtually all vehicle dashboards. Give some flare to those dull instrument panels, side-markers, dome lights, and courtesy lights with vibrant LED colors. Theses bulbs will never lose their color. They are also much brighter than stock filament bulbs and require much less power to run them. Less power consumption and longer bulb life (2000+ hours) compared to factory bulbs equals a win-win situation. Installation couldn't be easier, simply plug them in and go. Matching headlamps and other EVO lighting accessories are available in the same cold blue color for a complete customized look. Each package contains 5 LED bulbs and step by step instructions.

• Replaces all T5 bulbs
• Each package contains 5 bulbs and instructions
• Low power draw and lack of a filament provides for an extreme life span
• The bluest LED on the market today
• Quick and easy plug and play installation
• Limited 30 Days

Replace existing incandescent bulbs with high intensity true blue LEDs. These bulbs replace T5 bulbs that are found behind virtually all vehicle dashboards. Give some flare to those dull instrument panels, side-markers, dome lights, and courtesy lights with vibrant LED colors. Theses bulbs will never lose their color. They are also much brighter than stock filament bulbs and require much less power to run them. Less power consumption and longer bulb life (2000+ hours) compared to factory bulbs equals a win-win situation. Installation couldn't be easier, simply plug them in and go. Matching headlamps and other EVO lighting accessories are available in the same crisp white 6000K color for a complete customized look. Each package contains 5 LED bulbs and step by step instructions.

• Replaces all T5 bulbs
• Each package contains 5 bulbs and instructions
• Low power draw and lack of a filament provides for an extreme life span
• The whitest and brightest LED on the market today
• Quick and easy plug and play installation
• Limited 30 Days

EVO Formance LED EVO Eyes create a brilliant ring of Ultra-White light around virtually any headlight giving your vehicle a high-end and aggressive look. They are made from high temperature resistant materials so they will not melt when mounted inside the vehicle's headlight housing. Installation requires using a heat gun to loosen the seal that attaches the headlight lens. Once the lens is removed, simply install the EVO Eyes ring inside the headlight. Each ring comes with authentic 3M adhesive on the back, which allows for a wide range of mounting options inside any headlight. When installation is complete, use the heat gun to re-seal the lens back onto the headlight. No extra glue or silicone is required. Perfect for tricking out your car or truck. Based on Ultrabright technology and clearly visible day or night with a life expectancy of 2000+ hours. Package includes 2 - 9 cm Eyes and step by step instructions. Requires a 12 volt power system. Don't Change... Evolve

• 12V Universal installation (Instructions included)
• Uses authentic 3M adhesive
• Operational in extreme temperatures
• Ultrabright LED technology
• 9cm - white in color
• Limited 30 Days

EVO Formance blue LED EyeBrows use extremely bright and flat LEDs mounted on a flexible 9" black resin strip. When applied to a vehicle headlight, they work as daytime running lights. Because of their small size and high brightness, they can be installed in a wide variety of lighting applications. Strips can also be safely linked together (up to five light strips) to make one long strip (SOLD SEPARATELY). Each strip includes 4.5 feet of wiring. Useful for Tricking out your truck, car, Big Rig, R/C toys, and yes even your Boat - remember these are 100% waterproof. The LEDs can enhance the safety features on your vehicle by adding additional lights. The low profile (1/8 of an inch) design keeps the strips discrete when not in use. The LED EyeBrows have a life expectancy of 2000+ hours. 12 volt power source with a 3 amp in-line fuse required (not included). No ballast necessary. Each strip features a high quality authentic 3M adhesive strip for quick and easy mounting. Package includes 1 strip and step by step instructions. Don't Change... Evolve

• 4.5 feet of wiring included - most brands only provide 3 feet
• Fully universal and 100% waterproof
• Safely link up to five lights together in a series to make one long strip (12V installation)
• Enhances lighting structure while featuring a low profile design
• Flexible 9" strip featuring authentic 3M adhesive
• Limited- 30 Days

EVO Formance Multiuso Ultra-White LED lighting is for interior and exterior use. Instructions are included with four feet of wiring and three black finishing clips. LEDs clip into locking position for a secure mount and professional finish. Give your vehicle a unique custom look. Matching headlamps and other EVO lighting accessories are available in the same crisp Ultra-White 6000K color for a complete customized look. Easy to install, 5 mm bulb for universal applications using a 1/4" perforation allows this LED to be installed anywhere. Useful for tricking out your truck, car, big rig, motorcycle, RC car, and yes, even your boat - remember these are 100% waterproof giving the LEDs a true universal application. The LEDs can also enhance the safety features on your vehicle by adding additional lights. The LED Multiuse bulbs have a life expectancy of 2000+ hours. 12 volt power source with 3 amp in-line fuse required (not included). Package includes 3 LEDs with wires, 3 plastic grommets, and step by step instructions. For off road and decorative use only. Check state and local laws.

• Fully universal and 100% waterproof
• Illuminates brighter than incandensent bulbs and enhances lighting structures
• 12V Installation
• Matching headlamps and other EVO lighting accessories are available in the same ultra white color for a complete customized look
• Step by step instructions and 4 feet of wiring included
• Limited 30 Days

EVO Formance LED replacement bulbs use 12 high intensity forward projecting LEDs for intense illumination. The color and light output combines perfectly with HID systems. They are made to fit any round existing 1156 socket on the vehicle. Applications will vary with vehicle make and model. Common applications include running light, tail light, turn signal light, corner light, stop light, reverse light, brake light, parking light, side marker, back up light, dome lights, license plate and more. The LED 1156 Replacement bulbs have a life expectancy of 2000+ hours. Matching headlamps and other EVO lighting accessories are available in the same cold blue color for a complete customized look. Package includes 2 - 1156 bulbs and step by step instructions. For off road and decorative use only. Check state and local laws.

• Combines perfectly with HID systems
• Great for parking lights, brakes, turn signal, and reverse lights
• Easy 12 volt installation
• Round base-single intensity circuit
• Step by step instructions included
• Limited 30 Days

EVO Formance LED replacement bulbs use 12 high intensity forward projecting LEDs for intense illumination. The color and light output combines perfectly with HID systems. They are made to fit any round existing 1157 socket on the vehicle. Applications will vary with vehicle make and model. Common applications include running light, tail light, turn signal light, corner light, stop light, reverse light, brake light, parking light, side marker, back up light, dome lights, license plate and more. The LED 1157 Replacement bulbs have a life expectancy of 2000+ hours. Matching headlamps and other EVO lighting accessories are available in the same cold blue color for a complete customized look. Package includes 2 - 1157 bulbs and step by step instructions. For off road and decorative use only. Check state and local laws.

• Combines perfectly with HID systems
• Great for parking lights, brakes, turn signal, and reverse lights
• Easy 12 volt installation
• Round base-dual intensity circuit
• Step by step instructions included
• Limited 30 Days