Browse In:
Home
Shop by Brand: OKoffroad
Sort by
2 inch Steel Receiver Bracket w/ OD GREEN Powdercoated D-Shackle (OFF-ROAD RECOVERY)
2 inch Steel Receiver Bracket w/ OD GREEN Powdercoated D-Shackle (OFF-ROAD RECOVERY)
Online
$64.00for Each
Retail $96.00
Mfr PN: SHCSOD02
Stock: 0
|
Our steel receiver bracket is Zinc plated finish for superior corrosion resistance. Ideal for use with solid 2 inch receiver hitch as a secure rear recovery point.
- Will fit most 2 inch hitch receivers. - HD cast steel construction. - Zinc plated finish prevents corrosion. - 20,000 lbs. rating. - IN STOCK SHIPS TODAY! - With 3/4 inch D-shackle (7/8 inch pin) has a rust resistant powdercoated finish with working Load cast on shackle. |
Online
$64.00for Each
Retail $96.00
Mfr PN: SHCSOD02
Stock: 0
2 inch Steel Receiver Bracket w/ OLD GLORY BLUE Powdercoated D-Shackle & Locking Hitch Pin (OFF-ROAD RECOVERY)
2 inch Steel Receiver Bracket w/ OLD GLORY BLUE Powdercoated D-Shackle & Locking Hitch Pin (OFF-ROAD RECOVERY)
Online
$76.00for Each
Retail $114.00
Mfr PN: SHCSBL22-P
Stock: 0
|
Our steel receiver bracket is Zinc plated finish for superior corrosion resistance. Ideal for use with solid 2 inch receiver hitch as a secure rear recovery point.
- Will fit most 2 inch hitch receivers. - HD cast steel construction. - Zinc plated finish prevents corrosion. - 20,000 lbs. rating. - IN STOCK SHIPS TODAY! - With 3/4 inch D-shackle (7/8 inch pin) has a rust resistant powdercoated finish with working Load cast on shackle. - Lockable and rated (30,000 lbs) hitch pin supplied. |
Online
$76.00for Each
Retail $114.00
Mfr PN: SHCSBL22-P
Stock: 0
2 inch Steel Receiver Bracket w/ OLD GLORY BLUE Powdercoated D-Shackle (OFF-ROAD RECOVERY)
2 inch Steel Receiver Bracket w/ OLD GLORY BLUE Powdercoated D-Shackle (OFF-ROAD RECOVERY)
Online
$64.00for Each
Retail $96.00
Mfr PN: SHCSBL02
Stock: 0
|
Our steel receiver bracket is Zinc plated finish for superior corrosion resistance. Ideal for use with solid 2 inch receiver hitch as a secure rear recovery point.
- Will fit most 2 inch hitch receivers. - HD cast steel construction. - Zinc plated finish prevents corrosion. - 20,000 lbs. rating. - IN STOCK SHIPS TODAY! - With 3/4 inch D-shackle (7/8 inch pin) has a rust resistant powdercoated finish with working Load cast on shackle. |
Online
$64.00for Each
Retail $96.00
Mfr PN: SHCSBL02
Stock: 0
2 inch Steel Receiver Bracket w/ OLD MAN EMU YELLOW Powdercoated D-Shackle (OFF-ROAD RECOVERY)
2 inch Steel Receiver Bracket w/ OLD MAN EMU YELLOW Powdercoated D-Shackle (OFF-ROAD RECOVERY)
Online
$64.00for Each
Retail $96.00
Mfr PN: SHCSY02
Stock: 0
|
Our steel receiver bracket is Zinc plated finish for superior corrosion resistance. Ideal for use with solid 2 inch receiver hitch as a secure rear recovery point.
- Will fit most 2 inch hitch receivers. - HD cast steel construction. - Zinc plated finish prevents corrosion. - 20,000 lbs. rating. - IN STOCK SHIPS TODAY! - With 3/4 inch D-shackle (7/8 inch pin) has a rust resistant powdercoated finish with working Load cast on shackle. |
Online
$64.00for Each
Retail $96.00
Mfr PN: SHCSY02
Stock: 0
2 inch Steel Receiver Bracket w/ PATRIOT RED Powdercoated D-Shackle & Locking Hitch Pin (OFF-ROAD RECOVERY)
2 inch Steel Receiver Bracket w/ PATRIOT RED Powdercoated D-Shackle & Locking Hitch Pin (OFF-ROAD RECOVERY)
Online
$76.00for Each
Retail $114.00
Mfr PN: SHCSR22-P
Stock: 0
|
Our steel receiver bracket is Zinc plated finish for superior corrosion resistance. Ideal for use with solid 2 inch receiver hitch as a secure rear recovery point.
- Will fit most 2 inch hitch receivers. - HD cast steel construction. - Zinc plated finish prevents corrosion. - 20,000 lbs. rating. - IN STOCK SHIPS TODAY! - With 3/4 inch D-shackle (7/8 inch pin) has a rust resistant powdercoated finish with working Load cast on shackle. - Lockable and rated (30,000 lbs) hitch pin supplied. |
Online
$76.00for Each
Retail $114.00
Mfr PN: SHCSR22-P
Stock: 0
2 inch Steel Receiver Bracket w/ STAINLESS STEEL D-Shackle & Locking Hitch Pin (OFF-ROAD RECOVERY)
2 inch Steel Receiver Bracket w/ STAINLESS STEEL D-Shackle & Locking Hitch Pin (OFF-ROAD RECOVERY)
Online
$122.66for Each
Retail $184.00
Mfr PN: SHCSSS22-P
Stock: 0
|
Our steel receiver bracket is Zinc plated finish for superior corrosion resistance. Ideal for use with solid 2 inch receiver hitch as a secure rear recovery point.
- Will fit most 2 inch hitch receivers. - HD cast steel construction. - Zinc plated finish prevents corrosion. - 20,000 lbs. rating. - IN STOCK SHIPS TODAY! - With 3/4 inch D-shackle (7/8 inch pin) has a STAINLESS STEEL Rust resistant finish with working Load cast on shackle. - Lockable and rated (30,000 lbs) hitch pin supplied. |
Online
$122.66for Each
Retail $184.00
Mfr PN: SHCSSS22-P
Stock: 0
2 inch Steel Receiver Bracket w/ STAINLESS STEEL D-Shackle (OFF-ROAD RECOVERY)
2 inch Steel Receiver Bracket w/ STAINLESS STEEL D-Shackle (OFF-ROAD RECOVERY)
Online
$110.66for Each
Retail $166.00
Mfr PN: SHCSSS02
Stock: 0
|
Our steel receiver bracket is Zinc plated finish for superior corrosion resistance. Ideal for use with solid 2 inch receiver hitch as a secure rear recovery point.
- Will fit most 2 inch hitch receivers. - HD cast steel construction. - Zinc plated finish prevents corrosion. - 20,000 lbs. rating. - IN STOCK SHIPS TODAY! - With 3/4 inch D-shackle (7/8 inch pin) has a STAINLESS STEEL Rust resistant finish with working Load cast on shackle. |
Online
$110.66for Each
Retail $166.00
Mfr PN: SHCSSS02
Stock: 0
2 inch Steel Receiver Bracket w/ SUPER WHITE Powdercoated D-Shackle & Locking Hitch Pin (OFF-ROAD RECOVERY)
2 inch Steel Receiver Bracket w/ SUPER WHITE Powdercoated D-Shackle & Locking Hitch Pin (OFF-ROAD RECOVERY)
Online
$76.00for Each
Retail $114.00
Mfr PN: SHCSW22-P
Stock: 0
|
Our steel receiver bracket is Zinc plated finish for superior corrosion resistance. Ideal for use with solid 2 inch receiver hitch as a secure rear recovery point.
- Will fit most 2 inch hitch receivers. - HD cast steel construction. - Zinc plated finish prevents corrosion. - 20,000 lbs. rating. - IN STOCK SHIPS TODAY! - With 3/4 inch D-shackle (7/8 inch pin) has a rust resistant powdercoated finish with working Load cast on shackle. - Lockable and rated (30,000 lbs) hitch pin supplied. |
Online
$76.00for Each
Retail $114.00
Mfr PN: SHCSW22-P
Stock: 0
2 inch Steel Receiver Bracket w/ VanBeest "Green Pin" D-Shackle & Locking Hitch Pin (OFF-ROAD RECOVERY)
2 inch Steel Receiver Bracket w/ VanBeest "Green Pin" D-Shackle & Locking Hitch Pin (OFF-ROAD RECOVERY)
Online
$86.66for Each
Retail $130.00
Mfr PN: SHCSVB22-P
Stock: 0
|
Our steel receiver bracket is Zinc plated finish for superior corrosion resistance. Ideal for use with solid 2 inch receiver hitch as a secure rear recovery point.
- Will fit most 2 inch hitch receivers. - HD cast steel construction. - Zinc plated finish prevents corrosion. - 20,000 lbs. rating. - IN STOCK SHIPS TODAY! - With 3/4 inch D-shackle (7/8 inch pin) has a rust resistant galvanized finish with working Load cast on shackle. - Lockable and rated (30,000 lbs) hitch pin supplied. |
Online
$86.66for Each
Retail $130.00
Mfr PN: SHCSVB22-P
Stock: 0
2 inch Steel Receiver Bracket w/ VanBeest "Green Pin" D-Shackle (OFF-ROAD RECOVERY)
2 inch Steel Receiver Bracket w/ VanBeest "Green Pin" D-Shackle (OFF-ROAD RECOVERY)
Online
$76.00for Each
Retail $114.00
Mfr PN: SHCSVB02
Stock: 0
|
Our steel receiver bracket is Zinc plated finish for superior corrosion resistance. Ideal for use with solid 2 inch receiver hitch as a secure rear recovery point.
- Will fit most 2 inch hitch receivers. - HD cast steel construction. - Zinc plated finish prevents corrosion. - 20,000 lbs. rating. - IN STOCK SHIPS TODAY! - With 3/4 inch D-shackle (7/8 inch pin) has a rust resistant galvanized finish with working Load cast on shackle. |
Online
$76.00for Each
Retail $114.00
Mfr PN: SHCSVB02
Stock: 0
2-1/2 inch Axle LEAF SPRING CLAMPS - SET OF FOUR (4) (4X4 OFF-ROAD VEHICLES)
2-1/2 inch Axle LEAF SPRING CLAMPS - SET OF FOUR (4) (4X4 OFF-ROAD VEHICLES)
Online
$22.66for Set of 4
Retail $34.00
Mfr PN: LSC044
Stock: 0
|
U.S. Made! Application: 2-1/2 inch wide leaf springs (2 INCH & 3 INCH ALSO AVAILABLE).
- Sold in a set of four (4). - Notched dimple cross-strap. - Easy to install. - Our leaf spring clamps are a perfect choice when renewing or modifying your truck's leaf spring suspension. When adding or removing a leaf, our spring clamps allow the springs to be clamped exactly as desired. Note: If the location on the spring clamp on the leaf spring is not dimpled, simply hammer the cross-strap notch flat before installing. |
Online
$22.66for Set of 4
Retail $34.00
Mfr PN: LSC044
Stock: 0
3 inch Axle LEAF SPRING CLAMPS - SET OF FOUR (4) (4X4 OFF-ROAD VEHICLES)
3 inch Axle LEAF SPRING CLAMPS - SET OF FOUR (4) (4X4 OFF-ROAD VEHICLES)
Online
$22.66for Set of 4
Retail $34.00
Mfr PN: LSC043
Stock: 0
|
U.S. Made! Application: 3 inch wide leaf springs (2 INCH & 2-1/2 INCH ALSO AVAILABLE).
- Sold in a set of four (4). - Notched dimple cross-strap. - Easy to install. - Our leaf spring clamps are a perfect choice when renewing or modifying your truck's leaf spring suspension. When adding or removing a leaf, our spring clamps allow the springs to be clamped exactly as desired. Note: If the location on the spring clamp on the leaf spring is not dimpled, simply hammer the cross-strap notch flat before installing. |
Online
$22.66for Set of 4
Retail $34.00
Mfr PN: LSC043
Stock: 0
3 inch SPRING HANGERS FOR 2-1/2 inch LEAF SPRINGS (pair)
3 inch SPRING HANGERS FOR 2-1/2 inch LEAF SPRINGS (pair)
Online
$52.00for Pair
Retail $78.00
Mfr PN: BSB01
Stock: 0
|
U.S. Made! Sold in pairs.
- Weld-on brackets for 2-1/2 inch (Jeep YJ, Toyota, Land Rover, etc.). - Can be used to re-locate leaf spring mounts, and are useful in many other custom applications. The 2-1/2 inch bracket measures 3 inches between the spring mounting holes. Use with a spring bolt to complete the installation. |
Online
$52.00for Pair
Retail $78.00
Mfr PN: BSB01
Stock: 0
3/4 inch Jeep Crosby-McKissick D-Shackle - North American Made (SINGLE) (4X4 VEHICLE RECOVERY)
3/4 inch Jeep Crosby-McKissick D-Shackle - North American Made (SINGLE) (4X4 VEHICLE RECOVERY)
Online
$46.66for Single
Retail $70.00
Mfr PN: SHCM034
Stock: 0
|
9,500 lb Working Load Limit. 47,500 lb Ultimate Strength.
- 7/8" Pin Diameter. - Working Load Limit permanently cast on every shackle. - Forged - Quenched and Tempered, with alloy pin. - Rust resistant EPOXY finish. - IN STOCK SHIPS TODAY! The D-Ring Shackle is used for so many recovery situations. It is a must to have a set of quality D-ring shackles with adequate load rating, when venturing off-road. |
Online
$46.66for Single
Retail $70.00
Mfr PN: SHCM034
Stock: 0
3/4 inch Jeep Crosby-McKissick D-Shackles - North American Made (PAIR) (4X4 VEHICLE RECOVERY)
3/4 inch Jeep Crosby-McKissick D-Shackles - North American Made (PAIR) (4X4 VEHICLE RECOVERY)
Online
$86.66for Pair
Retail $130.00
Mfr PN: SHCM234
Stock: 0
|
9,500 lb Working Load Limit. 47,500 lb Ultimate Strength.
- 7/8" Pin Diameter. - Working Load Limit permanently cast on every shackle. - Forged - Quenched and Tempered, with alloy pin. - Rust resistant EPOXY finish. - IN STOCK SHIPS TODAY! The D-Ring Shackle is used for so many recovery situations. It is a must to have a set of quality D-ring shackles with adequate load rating, when venturing off-road. |
Online
$86.66for Pair
Retail $130.00
Mfr PN: SHCM234
Stock: 0
3/4 inch Jeep Crosby-McKissick D-Shackles - North American Made (Set of 4) (4X4 VEHICLE RECOVERY)
3/4 inch Jeep Crosby-McKissick D-Shackles - North American Made (Set of 4) (4X4 VEHICLE RECOVERY)
Online
$169.33for Set of Four
Retail $254.00
Mfr PN: SHCM234-4
Stock: 0
|
9,500 lb Working Load Limit. 47,500 lb Ultimate Strength.
- 7/8" Pin Diameter. - Working Load Limit permanently cast on every shackle. - Forged - Quenched and Tempered, with alloy pin. - Rust resistant EPOXY finish. - IN STOCK SHIPS TODAY! The D-Ring Shackle is used for so many recovery situations. It is a must to have a set of quality D-ring shackles with adequate load rating, when venturing off-road. |
Online
$169.33for Set of Four
Retail $254.00
Mfr PN: SHCM234-4
Stock: 0
3/4 inch Jeep D-Shackle - DESERT SAND Powdercoated (SINGLE) (4X4 RECOVERY)
3/4 inch Jeep D-Shackle - DESERT SAND Powdercoated (SINGLE) (4X4 RECOVERY)
Online
$24.00for Single
Retail $36.00
Mfr PN: SHTP034
Stock: 0
|
9,500 lb Working Load Limit. 47,500 lb Ultimate Strength.
- 7/8" Pin Diameter. - Working Load Limit permanently cast on every shackle. - Forged - Quenched and Tempered, with alloy pin. - Rust resistant powdercoated finish. Beware of 'painted' imitations! - IN STOCK SHIPS TODAY! The D-Ring Shackle is used for so many recovery situations. It is a must to have a set of quality D-ring shackles with adequate load rating, when venturing off-road. |
Online
$24.00for Single
Retail $36.00
Mfr PN: SHTP034
Stock: 0
3/4 inch Jeep D-Shackle - FJ-Cruiser TAN Powdercoated (SINGLE) (4X4 RECOVERY)
3/4 inch Jeep D-Shackle - FJ-Cruiser TAN Powdercoated (SINGLE) (4X4 RECOVERY)
Online
$24.00for Single
Retail $36.00
Mfr PN: SHFJTP034
Stock: 0
|
9,500 lb Working Load Limit. 47,500 lb Ultimate Strength.
- 7/8" Pin Diameter. - Working Load Limit permanently cast on every shackle. - Forged - Quenched and Tempered, with alloy pin. - Rust resistant powdercoated finish. Beware of 'painted' imitations! - IN STOCK SHIPS TODAY! The D-Ring Shackle is used for so many recovery situations. It is a must to have a set of quality D-ring shackles with adequate load rating, when venturing off-road. |
Online
$24.00for Single
Retail $36.00
Mfr PN: SHFJTP034
Stock: 0
3/4 inch Jeep D-SHACKLE - GALVANIZED (SINGLE) (4X4 VEHICLE RECOVERY)
3/4 inch Jeep D-SHACKLE - GALVANIZED (SINGLE) (4X4 VEHICLE RECOVERY)
Online
$17.33for Single
Retail $26.00
Mfr PN: SHG034
Stock: 0
|
Working Load Limit permanently cast on every shackle.
- Forged - Quenched and Tempered, with alloy pin. - Rust resistant Galvanized finish. - 9,500 lb Working Load Limit. 47,500 lb Ultimate Strength. - 7/8" Pin Diameter. - IN STOCK SHIPS TODAY! The D-Ring Shackle is used for so many recovery situations. It is a must to have a set of quality D-ring shackles with adequate load rating, when venturing off-road. Note: paint on pin is a brand marker and will peel off revealing hot-dipped galvanized surface. |
Online
$17.33for Single
Retail $26.00
Mfr PN: SHG034
Stock: 0
3/4 inch Jeep D-Shackle - OD Military Green Powdercoated (SINGLE) (4X4 RECOVERY)
3/4 inch Jeep D-Shackle - OD Military Green Powdercoated (SINGLE) (4X4 RECOVERY)
Online
$22.66for Single
Retail $34.00
Mfr PN: SHODP34
Stock: 0
|
9,500 lb Working Load Limit. 47,500 lb Ultimate Strength.
- 7/8" Pin Diameter. - Working Load Limit permanently cast on every shackle. - Forged - Quenched and Tempered, with alloy pin. - Rust resistant powdercoated finish. Beware of 'painted' imitations! - IN STOCK SHIPS TODAY! The D-Ring Shackle is used for so many recovery situations. It is a must to have a set of quality D-ring shackles with adequate load rating, when venturing off-road. |
Online
$22.66for Single
Retail $34.00
Mfr PN: SHODP34
Stock: 0
3/4 inch Jeep D-Shackle - OLD GLORY BLUE Powdercoated (SINGLE) (4X4 RECOVERY)
3/4 inch Jeep D-Shackle - OLD GLORY BLUE Powdercoated (SINGLE) (4X4 RECOVERY)
Online
$24.00for Single
Retail $36.00
Mfr PN: SHBLP034
Stock: 0
|
9,500 lb Working Load Limit. 47,500 lb Ultimate Strength.
- 7/8" Pin Diameter. - Working Load Limit permanently cast on every shackle. - Forged - Quenched and Tempered, with alloy pin. - Rust resistant powdercoated finish. Beware of 'painted' imitations! - IN STOCK SHIPS TODAY! The D-Ring Shackle is used for so many recovery situations. It is a must to have a set of quality D-ring shackles with adequate load rating, when venturing off-road. |
Online
$24.00for Single
Retail $36.00
Mfr PN: SHBLP034
Stock: 0
3/4 inch Jeep D-Shackle - OLD MAN EMU YELLOW Powdercoated (SINGLE) (4X4 RECOVERY)
3/4 inch Jeep D-Shackle - OLD MAN EMU YELLOW Powdercoated (SINGLE) (4X4 RECOVERY)
Online
$24.00for Single
Retail $36.00
Mfr PN: SHYP034
Stock: 0
|
9,500 lb Working Load Limit. 47,500 lb Ultimate Strength.
- 7/8" Pin Diameter. - Working Load Limit permanently cast on every shackle. - Forged - Quenched and Tempered, with alloy pin. - Rust resistant powdercoated finish. Beware of 'painted' imitations! - IN STOCK SHIPS TODAY! The D-Ring Shackle is used for so many recovery situations. It is a must to have a set of quality D-ring shackles with adequate load rating, when venturing off-road. |
Online
$24.00for Single
Retail $36.00
Mfr PN: SHYP034
Stock: 0
3/4 inch Jeep D-Shackle - PATRIOT RED Powdercoated (SINGLE) (4X4 RECOVERY)
3/4 inch Jeep D-Shackle - PATRIOT RED Powdercoated (SINGLE) (4X4 RECOVERY)
Online
$24.00for Single
Retail $36.00
Mfr PN: SHRP034
Stock: 0
|
9,500 lb Working Load Limit. 47,500 lb Ultimate Strength.
- 7/8" Pin Diameter. - Working Load Limit permanently cast on every shackle. - Forged - Quenched and Tempered, with alloy pin. - Rust resistant powdercoated finish. Beware of 'painted' imitations! - IN STOCK SHIPS TODAY! The D-Ring Shackle is used for so many recovery situations. It is a must to have a set of quality D-ring shackles with adequate load rating, when venturing off-road. |
Online
$24.00for Single
Retail $36.00
Mfr PN: SHRP034
Stock: 0
3/4 inch Jeep D-Shackle - SAPPHIRE BLUE Powdercoated (SINGLE) (4X4 RECOVERY)
3/4 inch Jeep D-Shackle - SAPPHIRE BLUE Powdercoated (SINGLE) (4X4 RECOVERY)
Online
$24.00for Single
Retail $36.00
Mfr PN: SHSAP034
Stock: 0
|
9,500 lb Working Load Limit. 47,500 lb Ultimate Strength.
- 7/8" Pin Diameter. - Working Load Limit permanently cast on every shackle. - Forged - Quenched and Tempered, with alloy pin. - Rust resistant powdercoated finish. Beware of 'painted' imitations! - IN STOCK SHIPS TODAY! The D-Ring Shackle is used for so many recovery situations. It is a must to have a set of quality D-ring shackles with adequate load rating, when venturing off-road. |
Online
$24.00for Single
Retail $36.00
Mfr PN: SHSAP034
Stock: 0
3/4 inch Jeep D-SHACKLE - STAINLESS STEEL - AISI # 316 (SINGLE) (4X4 RECOVERY)
3/4 inch Jeep D-SHACKLE - STAINLESS STEEL - AISI # 316 (SINGLE) (4X4 RECOVERY)
Online
$81.33for Single
Retail $122.00
Mfr PN: SHS136
Stock: 0
|
4 Ton Working Load. 44,000 lb Ultimate Strength.
- 7/8" Pin Diameter. Rust resistant stainless steel finish. American Iron and Steel Institute - AISI 316. - Working Load Limit permanently cast on every shackle. - Forged - Quenched and Tempered, with alloy pin. - IN STOCK SHIPS TODAY! The D-Ring Shackle is used for so many recovery situations. It is a must to have a set of quality D-ring shackles with adequate load rating, when venturing off-road. |
Online
$81.33for Single
Retail $122.00
Mfr PN: SHS136
Stock: 0
3/4 inch Jeep D-Shackle - SUPER WHITE Powdercoated (SINGLE) (4X4 RECOVERY)
3/4 inch Jeep D-Shackle - SUPER WHITE Powdercoated (SINGLE) (4X4 RECOVERY)
Online
$24.00for Single
Retail $36.00
Mfr PN: SHWP034
Stock: 0
|
9,500 lb Working Load Limit. 47,500 lb Ultimate Strength.
- 7/8" Pin Diameter. - Working Load Limit permanently cast on every shackle. - Forged - Quenched and Tempered, with alloy pin. - Rust resistant powdercoated finish. Beware of 'painted' imitations! - IN STOCK SHIPS TODAY! The D-Ring Shackle is used for so many recovery situations. It is a must to have a set of quality D-ring shackles with adequate load rating, when venturing off-road. |
Online
$24.00for Single
Retail $36.00
Mfr PN: SHWP034
Stock: 0
3/4 inch Jeep D-Shackles - BLACK POWDERCOATED (PAIR) (4X4 RECOVERY)
3/4 inch Jeep D-Shackles - BLACK POWDERCOATED (PAIR) (4X4 RECOVERY)
Online
$41.33for Pair
Retail $62.00
Mfr PN: SHBP234
Stock: 0
|
9,500 lb Working Load Limit. 47,500 lb Ultimate Strength.
- 7/8" Pin Diameter. - Working Load Limit permanently cast on every shackle. - Forged - Quenched and Tempered, with alloy pin. - Rust resistant powdercoated finish. Beware of 'painted' imitations! - IN STOCK SHIPS TODAY! The D-Ring Shackle is used for so many recovery situations. It is a must to have a set of quality D-ring shackles with adequate load rating, when venturing off-road. |
Online
$41.33for Pair
Retail $62.00
Mfr PN: SHBP234
Stock: 0
3/4 inch Jeep D-Shackles - BLACK POWDERCOATED (Set of 4) (4X4 RECOVERY)
3/4 inch Jeep D-Shackles - BLACK POWDERCOATED (Set of 4) (4X4 RECOVERY)
Online
$84.00for Set of Four
Retail $126.00
Mfr PN: SHBP234-4
Stock: 0
|
9,500 lb Working Load Limit. 47,500 lb Ultimate Strength.
- 7/8" Pin Diameter. - Working Load Limit permanently cast on every shackle. - Forged - Quenched and Tempered, with alloy pin. - Rust resistant powdercoated finish. Beware of 'painted' imitations! - IN STOCK SHIPS TODAY! The D-Ring Shackle is used for so many recovery situations. It is a must to have a set of quality D-ring shackles with adequate load rating, when venturing off-road. |
Online
$84.00for Set of Four
Retail $126.00
Mfr PN: SHBP234-4
Stock: 0
3/4 inch Jeep D-Shackles - DESERT SAND Powdercoated (PAIR) (4X4 RECOVERY)
3/4 inch Jeep D-Shackles - DESERT SAND Powdercoated (PAIR) (4X4 RECOVERY)
Online
$45.33for Pair
Retail $68.00
Mfr PN: SHTP234-2
Stock: 0
|
9,500 lb Working Load Limit. 47,500 lb Ultimate Strength.
- 7/8" Pin Diameter. - Working Load Limit permanently cast on every shackle. - Forged - Quenched and Tempered, with alloy pin. - Rust resistant powdercoated finish. Beware of 'painted' imitations! - IN STOCK SHIPS TODAY! The D-Ring Shackle is used for so many recovery situations. It is a must to have a set of quality D-ring shackles with adequate load rating, when venturing off-road. |
Online
$45.33for Pair
Retail $68.00
Mfr PN: SHTP234-2
Stock: 0
3/4 inch Jeep D-Shackles - DESERT SAND Powdercoated (Set of 4) (4X4 RECOVERY)
3/4 inch Jeep D-Shackles - DESERT SAND Powdercoated (Set of 4) (4X4 RECOVERY)
Online
$86.66for Set of Four
Retail $130.00
Mfr PN: SHTP234-4
Stock: 0
|
9,500 lb Working Load Limit. 47,500 lb Ultimate Strength.
- 7/8" Pin Diameter. - Working Load Limit permanently cast on every shackle. - Forged - Quenched and Tempered, with alloy pin. - Rust resistant powdercoated finish. Beware of 'painted' imitations! - IN STOCK SHIPS TODAY! The D-Ring Shackle is used for so many recovery situations. It is a must to have a set of quality D-ring shackles with adequate load rating, when venturing off-road. |
Online
$86.66for Set of Four
Retail $130.00
Mfr PN: SHTP234-4
Stock: 0
3/4 inch Jeep D-Shackles - FJ-Cruiser TAN Powdercoated (PAIR) (4X4 RECOVERY)
3/4 inch Jeep D-Shackles - FJ-Cruiser TAN Powdercoated (PAIR) (4X4 RECOVERY)
Online
$45.33for Pair
Retail $68.00
Mfr PN: SHFJTP234
Stock: 0
|
9,500 lb Working Load Limit. 47,500 lb Ultimate Strength.
- 7/8" Pin Diameter. - Working Load Limit permanently cast on every shackle. - Forged - Quenched and Tempered, with alloy pin. - Rust resistant powdercoated finish. Beware of 'painted' imitations! - IN STOCK SHIPS TODAY! The D-Ring Shackle is used for so many recovery situations. It is a must to have a set of quality D-ring shackles with adequate load rating, when venturing off-road. |
Online
$45.33for Pair
Retail $68.00
Mfr PN: SHFJTP234
Stock: 0
3/4 inch Jeep D-SHACKLES - GALVANIZED (PAIR) (4X4 VEHICLE RECOVERY)
3/4 inch Jeep D-SHACKLES - GALVANIZED (PAIR) (4X4 VEHICLE RECOVERY)
Online
$34.66for Pair
Retail $52.00
Mfr PN: SHG234
Stock: 0
|
Working Load Limit permanently cast on every shackle.
- Forged - Quenched and Tempered, with alloy pin. - Rust resistant Galvanized finish. - 9,500 lb Working Load Limit. 47,500 lb Ultimate Strength. - 7/8" Pin Diameter. - IN STOCK SHIPS TODAY! The D-Ring Shackle is used for so many recovery situations. It is a must to have a set of quality D-ring shackles with adequate load rating, when venturing off-road. Note: paint on pin is a brand marker and will peel off revealing hot-dipped galvanized surface. |
Online
$34.66for Pair
Retail $52.00
Mfr PN: SHG234
Stock: 0
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |